Summary for Test 2019-04-09-7-1
Test performed: ASTM A370-15Project Information
Project Identifiers | DEA: No Project |
---|---|
DIST-CO-RTE-PM | --- |
Award Date | Not set |
Closeout Date | 11/01/2022 |
Work Description | Special project identifier for material not associated with a project |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 04/09/2019 | Sample Unique Key | 7 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/15/2019 |
Sample type | Quality Assurance | A brief description of the sample | Coupon Casting |
The quantity of what the sample constitutes | 6 | From where was the sample collected | Distributor |
First name of sampler or witnessed by | Michelle | Last name of sampler or witnessed by | Haughey |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | SDI Farrar | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
Structure name | Not set |
Material Information
Material Type | SMTL TM6 - Ductile Iron Cast Samples | Heat Number (s) | B229 B279 C069 C159 C209 C219 |
---|---|---|---|
Part Number (s) | SDi 22 6 AH 22 6 BP 19 6 BP 22 6 AH 22 6 | Material Specification | A536 |
Grades | 80-55-06 | Metal Foundry Manufacturer (Mill) | Farrar Corporation |
Prestressing Manufacturer | SDI |
Test Details
DIME Sample ID: 2019-04-09-7
DIME Test ID: 2019-04-09-7-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2019-04-26
Test Results
Number of Samples: 8
Input Type: Calculated
Tester's full name: Steve
Date of test: 04/17/2019
UTM: 67KIP
Temperature: 72 F
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | B229 | 0.501 | 0.1971 | 61968 | 106290 | 11.5 | Steve | |
2 | B279 | 0.5 | 0.1963 | 62122 | 109860 | 10.8 | Steve | |
3 | C069 | 0.5 | 0.1963 | 61570 | 107780 | 10.1 | Steve | |
4 | C159 | 0.5 | 0.1963 | 62800 | 109550 | 10.5 | Steve | |
5 | C209 BP | 0.499 | 0.1956 | 63912 | 112310 | 11.4 | Steve | |
6 | C209 AH | 0.501 | 0.1971 | 63468 | 111650 | 10.9 | Steve | |
7 | C219 1.38 BP | 0.5 | 0.1963 | 63146 | 110970 | 11 | Steve | |
8 | C219 22.6 BP | 0.5 | 0.1963 | 61304 | 106540 | 11.2 | Steve |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 4/19/2019 ✔