Summary for Test 2019-03-20-7-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date03/20/2019 Sample Unique Key7
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/22/2019
Sample typeQuality Assurance A brief description of the sample5in Joint Seal
The quantity of what the sample constitutes300ft From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)1019171
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size5.0

Test Details

DIME Sample ID: 2019-03-20-7
DIME Test ID: 2019-03-20-7-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2019-04-16

Test Results


Input Type: Measured
Tester's full name: Steve
Date of test: 03/28/2019
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 116.245 lbs
Width at 4 x Load at W1: 2.05223 in
Nominal Width: 5 in
Measured Maximum Uncompressed Width: 5.154 in
Measured Minimum Uncompressed Width: 5.0705 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 5.144 in
Height of Contact Face: 4.9955 in
Length: no data
Spec Minimum Uncompressed Width: 5.0705 in
Area (5 Times of the Height of Contact Face): 24.978 sqin
Half of the Spec Minimum Uncompressed Width: 2.572 in
85 Percent of the Spec Minimum Uncompressed Width: 4.30993 in
3 Times of the Area: 74.934 sqin
4 Times of the Load at W1: 464.979 in
W1 (US Units): 4.31 in
W1 (Metric Units): 109.472 millimeters
W2 (US Units): 2.052 in
W2 (Metric Units): 52.127 millimeters
Satisfactory of MR of (US Units): 2.258 in
Satisfactory of MR of (Metric Units): 57.345 millimeters
Optional W1 Measurement 1: 4.3099 in
Optional W1 Measurement 2: 75.4336 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 4/9/2019