Summary for Test 2014-03-21-13301821-4

Test performed: CTM 214-August 2010

Project Information

Project IdentifiersProject ID: 209169
DEA: 073X3504
EFIS: 0712000166
DIST-CO-RTE-PM07-LA-105-R2.6
Award Date01/16/2014
Closeout Date03/21/2016
Work DescriptionRECONSTRUCT SLOPE AND HYDROSEED.
Location DescriptionLOS ANGELES COUNTY IN HAWTHORNE AT 0.1 MILE EAST OF INGLEWOOD AVENUE UNDERCROSSING
QA Service Level1 (Verified on 12/26/2013)

Sample Information

Sample Taken Date03/21/2014 Sample Unique Key13301821
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing03/26/2014
Sample typeAnnual Source Testing A brief description of the sample1x4 Rock
The quantity of what the sample constitutes5 Bags From where was the sample collectedSource
First name of sampler or witnessed byUnknown Last name of sampler or witnessed byUnknown
Title of samplerNot set Telephone number of samplerNot set
Laboratory sample identification4118B Linked DIME Sample IDNot set
The fabricator/manufacturer/facility nameRobertsons Ready Mix - Cabazon Quarry Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0008::CABAZON QUARRY
The fabricator's/manufacturer's product name for the sampleNot set The fabricator/manufacturer designation for the sampleNot set
The plant numberNot set A detailed description of where the material sample was collectedRobertsons Ready Mix - Cabazon Quarry - Stockpile
Where the material sample would have been placed if not sampledNot set Primary Aggregate Nominal Size1 inch
The concrete mix design number Lot numberNot set
Sublot numberNot set Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2014-03-21-13301821
DIME Test ID: 2014-03-21-13301821-4
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate
Test Release Date: 2015-02-20

Test Results


What size aggregate is being tested?: Coarse Aggregate
Input Type: Calculated
Tester's full name: Nemencio Daof
Date of test: 04/16/2014
Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data
Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data
Percentage Loss of material retained on 1 x ¾ in. sieve: no data
Percentage Loss of material retained on ¾ x ½ in. sieve: no data
Percentage Loss of material retained on ½ x ⅜ in. sieve: no data
Percentage Loss of material retained on ⅜ in. x #4 sieve: no data
Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data
Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data
Percentage Loss of material retained on 3/4 in. through #4 sieve: no data
Weighted Average Percent Loss of Coarse Aggregate: 6.2 %
Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data
Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 2/20/2015