Summary for Test 2019-02-11-6-3
Test performed: CTM 673-July 2012Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 02/11/2019 | Sample Unique Key | 6 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 02/12/2019 |
Sample type | Quality Assurance | A brief description of the sample | joint seal |
The quantity of what the sample constitutes | 200ft | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | Not set | |
Structure name | Not set |
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 0419131 |
---|---|---|---|
Manufacturer(s) | Watson Bowman | Temperature | 72 |
Humidity | 50 | Comments | Unknown |
Joint Seal Size | 1.75 |
Test Details
DIME Sample ID: 2019-02-11-6
DIME Test ID: 2019-02-11-6-3
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2019-03-11
Test Results
Input Type: Measured
Tester's full name: Steve
Date of test: 02/19/2019
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 55.0273 lbs
Width at 4 x Load at W1: 0.926739 in
Nominal Width: 1.75 in
Measured Maximum Uncompressed Width: 1.987 in
Measured Minimum Uncompressed Width: 1.954 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 1.906 in
Height of Contact Face: 1.9405 in
Length: no data
Spec Minimum Uncompressed Width: 1.906 in
Area (5 Times of the Height of Contact Face): 9.703 sqin
Half of the Spec Minimum Uncompressed Width: 0.953 in
85 Percent of the Spec Minimum Uncompressed Width: 1.6201 in
3 Times of the Area: 29.109 sqin
4 Times of the Load at W1: 220.109 in
W1 (US Units): 1.62 in
W1 (Metric Units): 41.151 millimeters
W2 (US Units): 0.927 in
W2 (Metric Units): 23.539 millimeters
Satisfactory of MR of (US Units): 0.693 in
Satisfactory of MR of (Metric Units): 17.611 millimeters
Optional W1 Measurement 1: 1.6609 in
Optional W1 Measurement 2: 29.3031 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 3/4/2019 ✔