Summary for Test 2018-12-18-9-1
Test performed: CTM 673-July 2012Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 12/18/2018 | Sample Unique Key | 9 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/20/2018 |
Sample type | Quality Assurance | A brief description of the sample | 3.75 elastomeric joint seal |
The quantity of what the sample constitutes | 550ft | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | NA | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 4118446 |
---|---|---|---|
Manufacturer(s) | Watson Bowman | Temperature | 72 |
Humidity | 50 | Comments | Unknown |
Joint Seal Size | 3.75 |
Test Details
DIME Sample ID: 2018-12-18-9
DIME Test ID: 2018-12-18-9-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2019-01-14
Test Results
Input Type: Measured
Tester's full name: Steve
Date of test: 12/31/2018
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 83.4447 lbs
Width at 4 x Load at W1: 1.59955 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.9795 in
Measured Minimum Uncompressed Width: 3.8655 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.936 in
Height of Contact Face: 3.711 in
Length: no data
Spec Minimum Uncompressed Width: 3.8655 in
Area (5 Times of the Height of Contact Face): 18.555 sqin
Half of the Spec Minimum Uncompressed Width: 1.968 in
85 Percent of the Spec Minimum Uncompressed Width: 3.28568 in
3 Times of the Area: 55.665 sqin
4 Times of the Load at W1: 333.779 in
W1 (US Units): 3.286 in
W1 (Metric Units): 83.456 millimeters
W2 (US Units): 1.6 in
W2 (Metric Units): 40.629 millimeters
Satisfactory of MR of (US Units): 1.686 in
Satisfactory of MR of (Metric Units): 42.828 millimeters
Optional W1 Measurement 1: 3.2857 in
Optional W1 Measurement 2: 56.0361 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 1/7/2019 ✔