Summary for Test 2018-12-13-3-1

Test performed: CTM 673-July 2012

Project Information

Project Identifiers
DEA: No Project
DIST-CO-RTE-PM---
Award DateNot set
Closeout Date11/01/2022
Work DescriptionSpecial project identifier for material not associated with a project
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date12/13/2018 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing12/17/2018
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes550 ft From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)3918437
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size3.75

Test Details

DIME Sample ID: 2018-12-13-3
DIME Test ID: 2018-12-13-3-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2019-01-15

Test Results


Input Type: Measured
Tester's full name: Steve
Date of test: 12/20/2018
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 79.5808 lbs
Width at 4 x Load at W1: 1.59825 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.981 in
Measured Minimum Uncompressed Width: 3.8845 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.908 in
Height of Contact Face: 3.6275 in
Length: no data
Spec Minimum Uncompressed Width: 3.8845 in
Area (5 Times of the Height of Contact Face): 18.138 sqin
Half of the Spec Minimum Uncompressed Width: 1.954 in
85 Percent of the Spec Minimum Uncompressed Width: 3.30183 in
3 Times of the Area: 54.414 sqin
4 Times of the Load at W1: 318.323 in
W1 (US Units): 3.302 in
W1 (Metric Units): 83.866 millimeters
W2 (US Units): 1.598 in
W2 (Metric Units): 40.595 millimeters
Satisfactory of MR of (US Units): 1.704 in
Satisfactory of MR of (Metric Units): 43.271 millimeters
Optional W1 Measurement 1: 3.3018 in
Optional W1 Measurement 2: 54.7768 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 1/8/2019