Summary for Test 2018-09-21-15-5
Test performed: AASHTO T84-14Project Information
| Project Identifiers | Project ID: 213182 DEA: 030C4724 EFIS: 0314000272 |
|---|---|
| DIST-CO-RTE-PM | 03-YOL-16-20.5/21.3, 28.2/31.8 |
| Award Date | 06/19/2018 |
| Closeout Date | 10/06/2021 |
| Work Description | ADD TURN LANES & ROUNDABOUT, ALIGN CURVE, WIDEN SHOULDER, CULVERT WORK |
| Location Description | YOLO COUNTY NEAR ESPARTO FROM 0.3 MILE WEST TO 0.4 MILE EAST OF COUNTY ROAD 79 AND FROM 0.1 MILE EAST OF PLAINFIELD STREET TO 0.1 MILE EAST OF COUNTY ROAD 90 |
| QA Service Level | 1 (Verified on 07/26/2018) |
Sample Information
| Sample Taken Date | 09/21/2018 | Sample Unique Key | 15 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 09/24/2018 |
| Sample type | Verification | A brief description of the sample | Aggs for JMF |
| The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Source |
| First name of sampler or witnessed by | Cameron | Last name of sampler or witnessed by | Richardson |
| Title of sampler | Manager Technical Services | Telephone number of sampler | Unknown |
| Laboratory sample identification | 03JMF18-031 | Linked DIME Sample ID | 2018-09-21-14 |
| The fabricator/manufacturer/facility name | Vulcan Materials - Madison | Transportation Laboratory (TL) Number | 783660 |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | N/A | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-57-0008::SOLANO CONCRETE OFF-CHANNEL |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | 1/2 RHMA TYPE G | The fabricator/manufacturer designation for the sample | 326120-MSRD |
| The plant number | NA | A detailed description of where the material sample was collected | Hot Bins |
| Where the material sample would have been placed if not sampled | Batch Drum | Primary Aggregate Nominal Size | 1/2 inch |
| The concrete mix design number | NA | Lot number | Not set |
| Sublot number | Not set | Aggregate Mix Number | Not set |
| HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-09-21-15
DIME Test ID: 2018-09-21-15-5
Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2018-10-15
Test Results
Input Type: Measured
Tester's full name: Jeff Herbert
Date of test: 10/08/2018
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 999.4 grams
Mass of the pycnometer with water (B): 688.1 grams
Mass of the oven dried sample (before pycnometer) (A): 490.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 490.9 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.601
Bulk specific gravity (SSD Basis): 2.650
Apparent specific gravity: 2.733
Absorption: 1.9 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 10/8/2018 ✔