Summary for Test 2014-05-16-9161920-1

Test performed: CTM 214-August 2010

Project Information

Project IdentifiersProject ID: 7446
DEA: 06442624
EFIS: 0600000972
DIST-CO-RTE-PM06-FRE,MAD-99-26.7/R31.6,R0.0/R1.6
Award Date10/10/2012
Closeout Date02/22/2017
Work DescriptionFREEWAY TO BE WIDENED AND REPLACE BRIDGE.
Location DescriptionFRESNO AND MADERA COUNTIES IN AND NEAR FRESNO FROM 0.2 MILES NORTH OF ASHLAN AVENUE OVERCROSSING TO 0.6 MILE NORTH OF AVENUE 7 OVERCROSSING
QA Service Level1 (Verified on 11/06/2012)

Sample Information

Sample Taken Date05/16/2014 Sample Unique Key9161920
Will the laboratory/organization for which you are a member perform testing on this material sample?No Date that the sample was received by the laboratory/organization performing the testing04/29/2014
Sample typePreliminary A brief description of the sample1x4
The quantity of what the sample constitutes1 Bag From where was the sample collectedSource
First name of sampler or witnessed byAlan Last name of sampler or witnessed byVong
Title of samplerNot set Telephone number of samplerNot set
Laboratory sample identification14CPCC-0226 C812745A Linked DIME Sample IDNot set
The fabricator/manufacturer/facility nameVulcan Friant Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)NA
The fabricator's/manufacturer's product name for the sampleNot set The fabricator/manufacturer designation for the sampleNot set
The plant numberNot set A detailed description of where the material sample was collectedStockpile
Where the material sample would have been placed if not sampledNot set Primary Aggregate Nominal Size
The concrete mix design number Lot numberNot set
Sublot numberNot set HMA Design ID

Test Details

DIME Sample ID: 2014-05-16-9161920
DIME Test ID: 2014-05-16-9161920-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate
Test Release Date: 2014-05-19

Test Results


What size aggregate is being tested?: Coarse Aggregate
Input Type: Calculated
Tester's full name: Thomas Stinnett
Date of test: 05/16/2014
Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data
Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data
Percentage Loss of material retained on 1 x ¾ in. sieve: no data
Percentage Loss of material retained on ¾ x ½ in. sieve: no data
Percentage Loss of material retained on ½ x ⅜ in. sieve: no data
Percentage Loss of material retained on ⅜ in. x #4 sieve: no data
Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data
Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data
Percentage Loss of material retained on 3/4 in. through #4 sieve: no data
Weighted Average Percent Loss of Coarse Aggregate:4.8 %
Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum):no data
Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum):no data
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 5/19/2014