Summary for Test 2018-07-06-7-1
Test performed: CONCLP 3-16Project Information
| Project Identifiers | Project ID: 213032 DEA: 101G3304 EFIS: 1016000157 |
|---|---|
| DIST-CO-RTE-PM | 10-MER-5,152-Var |
| Award Date | 03/13/2018 |
| Closeout Date | 12/18/2018 |
| Work Description | REPLACE JOINT SEALS, APPROACH SLABS, POLYESTER CONCRETE OVERLAY. |
| Location Description | MERCED COUNTY AT VARIOUS LOCATIONS. |
| QA Service Level | 1 (Verified on 04/24/2018) |
Sample Information
| Sample Taken Date | 07/06/2018 | Sample Unique Key | 7 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/06/2018 |
| Sample type | Quality Assurance | A brief description of the sample | polyester |
| The quantity of what the sample constitutes | 80 drums | From where was the sample collected | Source |
| First name of sampler or witnessed by | Chris | Last name of sampler or witnessed by | Nunes |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | KBP | Transportation Laboratory (TL) Number | Unknown |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 0001129648 |
|---|---|---|---|
| Batch number | 0001129648 | Mix number | 3326 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-07-06-7
DIME Test ID: 2018-07-06-7-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: CONCLP 3-16: Polyester Resin
Test Release Date: 2018-07-27
Test Results
Input Type: Measured
Tester's full name: Mike Mullins
Date of test: 07/27/2018
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 105
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.08
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 64.7
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 3017
Styrene ASTM D 2369 40% to 50 %: 45.6
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 799
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.1
General comments (publicly viewable) (Max 1000 characters): accepted suppliers results
Test was verified on 7/27/2018 ✔