Test 2018-02-27-21-7 (AASHTO T104-99r16) Summary

Project Information
Project IdentifiersProject ID: 212679
DEA: 023E7204
EFIS: 0200020154
DIST-CO-RTE-PM02-TEH-36-42.1/46.0
Work DescriptionCOLD PLANING, PAVING, MINOR CONCRETE, ELECTRICAL AND STRIPING WORK.
Location DescriptionTEHAMA COUNTY IN AND NEAR RED BLUFF FROM EAST SAND SLOUGH BRIDGE TO 0.6 MILE EAST OF STICE ROAD
Sample Information
Sample Taken Date2/27/2018 Sample Unique Key21
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing2/27/2018
Sample typeVerification A brief description of the sampleUntreated Virgin 1/2-inch Type A Aggregate, Laboratory Combined
The quantity of what the sample constitutesJMF Verification From where was the sample collectedManufacturer
First name of sampler or witnessed byMichael Last name of sampler or witnessed byAllegretto
Title of samplerLab Tech Laboratory sample identificationD77292F
The fabricator/manufacturer/facility nameTullis, Inc - Northstate Asphalt - Redding, CA Transportation Laboratory (TL) Number852088
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-45-0057::SHASTA RANCH AGGREGATES
The fabricator's/manufacturer's product name for the sampleUntreated Virgin 1/2-inch Type A The fabricator/manufacturer designation for the sampleL170860
The plant numberUnknown A detailed description of where the material sample was collectedStockpiles at Plant
Where the material sample would have been placed if not sampledUnknown Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberJMF 18-01-S1 Lot numberNot set
Sublot numberNot set JMF Verification ID JMF3513-2018-22
Test Details
DIME Sample ID: 2018-02-27-21
DIME Test ID: 2018-02-27-21-7
Testing Lab: CT D02 - North Region Materials Lab
Test Method: AASHTO T104-99r16: Standard Method of Test for Soundness of Aggregate by Use of Sodium Sulfate or Magnesium Sulfate (Soundness)
Test Release Date: 2018-07-16
Test Results

Percentage of the total sample represented by each size

Size of aggregate being tested: Coarse and Fine Aggregate
What type of solution was used?: Sodium sulfate
What was the condition of the solution?: Previously used
Number of immersion cycles performed: 5
Input Type: Calculated
Tester's full name: Benjamin Lenz
Date of test: 04/12/2018
Percentage of 2 ½ x 1 ½ material loss: no data
Percentage of 1 ½ x ¾ inch material loss: no data
Percentage of ¾ x ⅜ inch material loss: no data
Percentage of ⅜ inch x No. 4 material loss: no data
Percentage of No. 4 x 8 material loss: no data
Percentage of No. 8 x 16 material loss: no data
Percentage of No. 16 x 30 material loss: no data
Percentage of No. 30 x 50 material loss: no data
Coarse weighted average loss:1 %
Fine weighted average loss:3 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 07/16/2018