Summary for Test 2018-04-13-3-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 212948 DEA: 010F8604 EFIS: 0116000075 |
---|---|
DIST-CO-RTE-PM | 01-HUM,DN-101-R131.7/R137.2,M0.0/M0.1 |
Award Date | 02/22/2018 |
Closeout Date | 11/27/2018 |
Work Description | RHMA, COLD PLANE AND HMA AT RAMPS, REPLACE GUARDRAIL WITH MGS |
Location Description | HUMBOLDT AND DEL NORTE COUNTIES NEAR ORICK FROM 2.5 MILES NORTH OF BOYES CREEK VIADUCT TO NORTH PRAIRIE CREEK UNDERCROSSING |
QA Service Level | 1 (Verified on 04/27/2018) |
Sample Information
Sample Taken Date | 04/13/2018 | Sample Unique Key | 3 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/16/2018 |
Sample type | Verification | A brief description of the sample | virgin aggregate |
The quantity of what the sample constitutes | JMF Verification | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Ken | Last name of sampler or witnessed by | Sutterfield |
Title of sampler | ARE | Telephone number of sampler | Unknown |
Laboratory sample identification | 61919 | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Tidewater Smith River | Transportation Laboratory (TL) Number | 972601 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-08-0002 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 18-1454.09 | The fabricator/manufacturer designation for the sample | 18-1454.09 |
The plant number | Unknown | A detailed description of where the material sample was collected | cold feed |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | Unknown | Lot number | Not set |
Sublot number | Not set | Aggregate Mix Number | Not set |
HMA Pay | No |
Test Details
DIME Sample ID: 2018-04-13-3
DIME Test ID: 2018-04-13-3-1
Testing Lab: CT D01 - District 1 Materials Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2018-04-26
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Calculated
Tester's full name: Leif Ayres
Date of test: 04/19/2018
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 100 %
Cumulative percent passing the 3/4 in. sieve: 100 %
Cumulative percent passing the 1/2 in. sieve: 99 %
Cumulative percent passing the 3/8 in. sieve: 83 %
Cumulative percent passing the 1/4 in. sieve: 83 %
Cumulative percent passing the #4 sieve: 31 %
Cumulative percent passing the #8 sieve: 17 %
Cumulative percent passing the #16 sieve: 11 %
Cumulative percent passing the #30 sieve: 8 %
Cumulative percent passing the #50 sieve: 6 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 3.7 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 4/19/2018 ✔