Summary for Test 2018-02-01-5-1
Test performed: CONCLP 3-16Project Information
| Project Identifiers | Project ID: 212745 DEA: 044G8004 EFIS: 0413000050 |
|---|---|
| DIST-CO-RTE-PM | 04-ALA-580-R26.8/R27.1 |
| Award Date | 11/27/2017 |
| Closeout Date | 03/14/2019 |
| Work Description | BRIDGE DECK REHABILITATION |
| Location Description | ALAMEDA COUNTY, IN CASTRO VALLEY FROM 0.3 MILE WEST OF SUNNYSLOPE AVENUE OVERCROSSING TO 0.4 MILE EAST OF OLD DUBLIN ROAD |
| QA Service Level | 1 (Verified on 01/17/2018) |
Sample Information
| Sample Taken Date | 02/01/2018 | Sample Unique Key | 5 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/29/2018 |
| Sample type | Quality Control | A brief description of the sample | 1 gallon can |
| The quantity of what the sample constitutes | 2 tankers | From where was the sample collected | Source |
| First name of sampler or witnessed by | Chris | Last name of sampler or witnessed by | Nunes |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Kwik bond and Reichhold | Transportation Laboratory (TL) Number | Sacramento Caltrans lab |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Polyester | Mfg. Lot Number(s) | 1098834 |
|---|---|---|---|
| Batch number | 1098834 | Mix number | 1098834 |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-02-01-5
DIME Test ID: 2018-02-01-5-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: CONCLP 3-16: Polyester Resin
Test Release Date: 2018-02-07
Test Results
Input Type: Measured
Tester's full name: Bang Nguyen
Date of test: 02/07/2018
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 100
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.08
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 68
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 3149
Styrene ASTM D 2369 40% to 50 %: 46
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 633
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.16
General comments (publicly viewable) (Max 1000 characters): polyester resin batch#: 0001098834 is satisfactory for use (accepted suppliers test results)
Test was verified on 4/19/2018 ✔