Summary for Test 2018-04-02-3-1
Test performed: AASHTO T27-14Project Information
Project Identifiers | Project ID: 212886 DEA: 023H1204 |
---|---|
DIST-CO-RTE-PM | 02-TEH-5-R0.0/R22.4 |
Award Date | 01/03/2018 |
Closeout Date | 02/06/2019 |
Work Description | COLD PLANE RAC-O, PLACE RHMA-O, REPLACE AC SURFACING, MBGR |
Location Description | TEHAMA COUNTY AT AND NEAR CORNING FROM GLENN COUNTY LINE TO 0.3 MILE NORTH OF BRANCH COYOTE CREEK BRIDGE |
QA Service Level | 1 (Verified on 01/08/2019) |
Sample Information
Sample Taken Date | 04/02/2018 | Sample Unique Key | 3 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 04/03/2018 |
Sample type | Acceptance | A brief description of the sample | Treated Virgin Aggregate |
The quantity of what the sample constitutes | Production Start Up Evaluation | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Michael | Last name of sampler or witnessed by | Allegretto |
Title of sampler | Lab Tech | Telephone number of sampler | Unknown |
Laboratory sample identification | 17-07-P07, D77311A | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Tullis Inc - Northstate Asphalt - Redding, CA | Transportation Laboratory (TL) Number | 852090 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-45-0057 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Cold Feed |
Where the material sample would have been placed if not sampled | Digout HMA | Primary Aggregate Nominal Size | 3/4 inch |
The concrete mix design number | Unknown | Lot number | Not set |
Sublot number | Not set | Aggregate Mix Number | Not set |
HMA Pay | No |
Test Details
DIME Sample ID: 2018-04-02-3
DIME Test ID: 2018-04-02-3-1
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T27-14: Standard Method of Test for Sieve Analysis of Fine and Coarse Aggregates (Sieve Analysis)
Test Release Date: 2018-04-06
Test Results
What type of gradation is being tested?: HMA Gradation
Individual or cumulative mass retained on each sieve?: Cumulative Mass Retained
Does this test use 1/4 sieve? (question for HMA Gradation Type): Yes
Has the fine aggregate sample been reduced?: No
Input Type: Measured
Tester's full name: Darrell Valasek
Date of test: 04/03/2018
Cumulative Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
5120.6 grams | ||||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
0.0 grams | 100 % | |||||
556.0 grams | 89 % | |||||
1813.0 grams | 65 % | |||||
2804 grams | 45 % | |||||
3097.0 grams | 40 % | |||||
174.6 grams | 26 % | |||||
285.0 grams | 17 % | |||||
351.1 grams | 12 % | |||||
393.7 grams | 9 % | |||||
422.3 grams | 7 % | |||||
441.5 grams | 5 % | |||||
grams |
General comments (publicly viewable) (Max 1000 characters): Gradation of Cold Feed
Test was verified on 4/6/2018 ✔