Summary for Test 2018-01-12-7-2
Test performed: AASHTO T275-07r12Project Information
| Project Identifiers | Project ID: 99999 DEA: 0322222 |
|---|---|
| DIST-CO-RTE-PM | 03-SAC,OMG-888,99,80-0.6-0.6 |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| Location Description | THIS PROJECT RECORD WAS ADDED FOR DIME TESTERS - DATA SUBMITTED FOR THIS PROJECT SHOULD NOT BE USED FOR ANY OTHER PURPOSES. |
| QA Service Level | (Verified on 04/05/2013) |
Sample Information
| Sample Taken Date | 01/12/2018 | Sample Unique Key | 7 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/12/2018 |
| Sample type | Verification | A brief description of the sample | 3/4-inch Type A HMA |
| The quantity of what the sample constitutes | JMF | From where was the sample collected | Manufacturer |
| First name of sampler or witnessed by | a | Last name of sampler or witnessed by | a |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | SNC - Mustang Asphalt Plant | Transportation Laboratory (TL) Number | Unknown |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | Hot Mix Asphalt | HMA Type | Type A HMA |
|---|---|---|---|
| HMA Grading | 3/4 inch | Lot number | Not set |
| Sublot number | Not set | HMA Mix Number | Not set |
| HMA Pay | No |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2018-01-12-7
DIME Test ID: 2018-01-12-7-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T275-07r12: Standard Method of Test for Bulk Specific Gravity (Gmb) of Compacted Asphalt Mixtures Using Paraffin-Coated Specimens (Bulk Specific Gravity)
Test Release Date: 2018-01-24
Test Results
Number of tests: 3
What test procedure is performed?: Method A
Input Type: Measured
Tester's full name: Ward Jenkins
Date of test: 01/17/2018
Mass of the dry specimen in air: 4735.9 g
Mass of the dry specimen plus paraffin coating in air: 4783.9 g
Mass of the dry specimen plus paraffin coating in water: 2767.2 g
Specific gravity of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 2 of the dry specimen in air: 4742.8 g
Mass 2 of the dry specimen plus paraffin coating in air: 4789.0 g
Mass 2 of the dry specimen plus paraffin coating in water: 2765.7 g
Specific gravity 2 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Mass 3 of the dry specimen in air: 4784.2 g
Mass 3 of the dry specimen plus paraffin coating in air: 4827.6 g
Mass 3 of the dry specimen plus paraffin coating in water: 2797.8 g
Specific gravity 3 of the paraffin at 25 ± 1°C (77 ± 1.8°F): 0.9
Bulk Specific Gravity: 2.412
Bulk Specific Gravity 2: 2.405
Bulk Specific Gravity 3: 2.414
Average Bulk Specific Gravity: 2.41
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 1/17/2018 ✔