Summary for Test 2017-12-19-23-1
Test performed: ASTM A370-15Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 12/19/2017 | Sample Unique Key | 23 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 12/21/2017 |
Sample type | Quality Assurance | A brief description of the sample | Coupon Castings |
The quantity of what the sample constitutes | 4 | From where was the sample collected | Distributor |
First name of sampler or witnessed by | Michelle | Last name of sampler or witnessed by | Haughey |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | SDI Farrar | Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | NA | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM6 - Ductile Iron Cast Samples | Heat Number (s) | K097, K157, K297, K307 |
---|---|---|---|
Part Number (s) | 196PC1BP 226AH ACS316SAH 226PCBP | Material Specification | A536 |
Grades | 80-55-06 | Metal Foundry Manufacturer (Mill) | Farrar Corporation |
Prestressing Manufacturer | SDI |
Test Details
DIME Sample ID: 2017-12-19-23
DIME Test ID: 2017-12-19-23-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2018-01-03
Test Results
Number of Samples: 4
Input Type: Calculated
Tester's full name: Brian
Date of test: 12/27/2017
UTM: 67KIP
Temperature: 72 F
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | K297 | 0.504 | 0.1995 | 62692 | 108540 | 11.8 | Brian | |
2 | K307 | 0.503 | 0.1987 | 62365 | 107440 | 9.1 | Brian | |
3 | K097 | 0.502 | 0.1979 | 60935 | 105330 | 10.7 | Brian | |
4 | K157 | 0.503 | 0.1987 | 62789 | 108070 | 10.2 | Brian |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 12/27/2017 ✔