Summary for Test 2017-11-07-3-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 88888
DEA: SMTL-STOCK
EFIS: SMTL-STOCK
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work DescriptionSpecial project for SMTL stock material. Object Code: 1025. J2 DEA: 912680.
Location DescriptionNot set
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date11/07/2017 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/08/2017
Sample typeQuality Assurance A brief description of the sample3.75 elastomeric joint seal
The quantity of what the sample constitutes1 From where was the sample collectedManufacturer
First name of sampler or witnessed byPaula Last name of sampler or witnessed byWilcox
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)2617404
Manufacturer(s)Watson Bowman Temperaturena
Humidityna CommentsUnknown
Joint Seal Size3.75"

Test Details

DIME Sample ID: 2017-11-07-3
DIME Test ID: 2017-11-07-3-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-11-29

Test Results


Input Type: Measured
Tester's full name: Brian
Date of test: 11/14/2017
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 55.2483 lbs
Width at 4 x Load at W1: 1.55485 in
Nominal Width: 3.75 in
Measured Maximum Uncompressed Width: 3.8795 in
Measured Minimum Uncompressed Width: 3.746 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.786 in
Height of Contact Face: 3.578 in
Length: no data
Spec Minimum Uncompressed Width: 3.746 in
Area (5 Times of the Height of Contact Face): 17.89 sqin
Half of the Spec Minimum Uncompressed Width: 1.893 in
85 Percent of the Spec Minimum Uncompressed Width: 3.1841 in
3 Times of the Area: 53.67 sqin
4 Times of the Load at W1: 220.993 in
W1 (US Units): 3.184 in
W1 (Metric Units): 80.876 millimeters
W2 (US Units): 1.555 in
W2 (Metric Units): 39.493 millimeters
Satisfactory of MR of (US Units): 1.629 in
Satisfactory of MR of (Metric Units): 41.383 millimeters
Optional W1 Measurement 1: 3.1841 in
Optional W1 Measurement 2: 54.0278 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 11/22/2017