Summary for Test 2017-07-27-16-1
Test performed: AGGLP SIEVE_ANALYSIS-1Project Information
Project Identifiers | Project ID: 212622 DEA: 051F0804 EFIS: 0513000052 |
---|---|
DIST-CO-RTE-PM | 05-MON-1-2.5-67.3 |
Award Date | 10/02/2018 |
Closeout Date | 08/23/2021 |
Work Description | REPLACEMENT OF 7 CULVERTS ALONG HWY 1. |
Location Description | ON ROUTE 1 IN MONTEREY COUNTY AT VARIOUS LOCATIONS BETWEEN 2.5 MILES NORTH OF THE MONTEREY/SAN LUIS OBISPO COUNTY LINE AND 0.6 MILES SOUTH OF MALPASO CREEK BRIDGE. |
QA Service Level | 1 (Verified on 09/30/2019) |
Sample Information
Sample Taken Date | 07/27/2017 | Sample Unique Key | 16 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/09/2017 |
Sample type | Quality Control | A brief description of the sample | Culvert replacement @ Loc 7 PM 67.3 |
The quantity of what the sample constitutes | 1 bag | From where was the sample collected | Job Site |
First name of sampler or witnessed by | Ryan | Last name of sampler or witnessed by | Duran |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | 17SOIL-0244 | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | NA | Transportation Laboratory (TL) Number | C835960 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Soil | The fabricator's/manufacturer's product name for the sample | Unknown |
---|---|---|---|
The fabricator/manufacturer designation for the sample | Unknown | A detailed description of where the material sample was collected | RW-17-005 |
Where the material sample would have been placed if not sampled | 0 to 5 ft |
Test Details
DIME Sample ID: 2017-07-27-16
DIME Test ID: 2017-07-27-16-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: AGGLP SIEVE_ANALYSIS-1: Soils for Corrosion Sieve Analysis
Test Release Date: 2017-08-18
Test Results
Input Type: Measured
Tester's full name: Phillip Montes
Date of test: 08/18/2017
Total mass of material in the sample: 20314 grams
Cumulative mass retained on the 2 in. sieve: 0 grams
Cumulative mass retained on the 1 1/2 in. sieve: 0 grams
Cumulative mass retained on the 1 in. sieve: 32 grams
Cumulative mass retained on the 3/4 in. sieve: 13 grams
Cumulative mass retained on the 1/2 in. sieve: 29 grams
Cumulative mass retained on the 3/8 in. sieve: 7 grams
Cumulative mass retained on the #4 sieve: 46 grams
Cumulative mass retained on the #8 sieve: 49 grams
Total sample mass passing the #4 sieve: 2450 grams
Total mass of fine material in the sample: 605 grams
Cumulative mass retained on the pan: 554 grams
Total cumulative mass of coarse aggregate: 127 grams
Total cumulative mass of fine aggregate: 603 grams
Sum of coarse and fine aggregate: 2577 grams
Percentage of coarse material: 5 %
Percentage of fine material: 95 %
Cumulative percent passing the 2 in. sieve: 100 %
Cumulative percent passing the 1 1/2 in. sieve: 100 %
Cumulative percent passing the 1 in. sieve: 99 %
Cumulative percent passing the 3/4 in. sieve: 98 %
Cumulative percent passing the 1/2 in. sieve: 97 %
Cumulative percent passing the 3/8 in. sieve: 97 %
Cumulative percent passing the #4 sieve: 95 %
Cumulative percent passing the #8 sieve: 87 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/18/2017 ✔