Summary for Test 2017-06-08-1-1
Test performed: ASTM A370-15Project Information
Project Identifiers | Project ID: 88888 DEA: SMTL-STOCK EFIS: SMTL-STOCK |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | Special project for SMTL stock material. Object Code: 1025. J2 DEA: 912680. |
Location Description | Not set |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 06/08/2017 | Sample Unique Key | 1 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/09/2017 |
Sample type | Quality Assurance | A brief description of the sample | Coupon Castings |
The quantity of what the sample constitutes | 7 | From where was the sample collected | Distributor |
First name of sampler or witnessed by | M | Last name of sampler or witnessed by | Haughey |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | SDI Farrar | Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | N/A | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM6 - Ductile Iron Cast Samples | Heat Number (s) | B287, C017, C077, C087, C157, C167 |
---|---|---|---|
Part Number (s) | 27 6 PC B287 27 6 PC C017 27 6 PC C077 | Material Specification | A536 |
Grades | 80-55-06 | Metal Foundry Manufacturer (Mill) | Farrar Corporation |
Prestressing Manufacturer | SDI |
Test Details
DIME Sample ID: 2017-06-08-1
DIME Test ID: 2017-06-08-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2017-06-19
Test Results
Number of Samples: 7
Input Type: Calculated
Tester's full name: Fred
Date of test: 06/12/2017
UTM: 67KIP
Temperature: 72 F
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | B287 | 0.496 | 0.1932 | 61126 | 104430 | 10.2 | Fred | |
2 | C017 | 0.497 | 0.194 | 61727 | 106260 | 9.2 | Fred | |
3 | C077 | 0.496 | 0.1932 | 59953 | 103630 | 9.5 | Fred | |
4 | C087 | 0.496 | 0.1932 | 62061 | 104890 | 7.7 | Fred | |
5 | C087 | 0.496 | 0.1932 | 61727 | 104540 | 8.6 | Fred | |
6 | C0157 | 0.496 | 0.1932 | 62215 | 105670 | 8.3 | Fred | |
7 | C0167 | 0.495 | 0.1924 | 64137 | 112310 | 10 | Fred |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 6/12/2017 ✔