Summary for Test 2017-05-01-6-1
Test performed: ASTM A370-15Project Information
Project Identifiers | Project ID: 8196 DEA: 59912684 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | |
Location Description | |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 05/01/2017 | Sample Unique Key | 6 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/09/2017 |
Sample type | Quality Assurance | A brief description of the sample | F1554 anchor rods |
The quantity of what the sample constitutes | 14 | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Daniel | Last name of sampler or witnessed by | Reyes |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | A M Bolt | Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | NA | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
---|---|---|---|
Heat Number(s) | 3068594, 580287 03, 3066884 Retest | Nut Mfg. Lot Number(s) | 35899A, 71849440 |
Washer Mfg. Lot Number(s) | 297736, 297792 | Bolt Specification | 1554 Grade 55 |
Bolt Length(s) | 18", 42", 12" | Nut Specification | A194 2H HDG |
Washer Specification | F436 HDG | Finish | HDG |
Diameter/Size | .75, 2.25, .625 | Bolt Mfg. Lot Number | |
Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
DIME Sample ID: 2017-05-01-6
DIME Test ID: 2017-05-01-6-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM A370-15: Standard Test Methods and Definitions for Mechanical Testing of Steel Products (Tensile - Round Sample)
Test Release Date: 2017-05-26
Test Results
Number of Samples: 8
Input Type: Calculated
Tester's full name: Brian
Date of test: 05/18/2017
UTM: 67KIP
Temperature: 72 F
Num | Sample | Heat Number | Diameter (in) | Area (sqin) | Stress at Offset (psi) | Tensile Strength (psi) | Elongation in 4 x d (%) | Tested By |
---|---|---|---|---|---|---|---|---|
1 | 3068594 | 0.498 | 0.1948 | 66851 | 89610 | 28.5 | Brian | |
2 | 3068594 | 0.501 | 0.1971 | 66100 | 89280 | 29.8 | Brian | |
3 | 5802878703 | 0.498 | 0.1948 | 66626 | 89640 | 27.9 | Brian | |
4 | 5802878703 | 0.499 | 0.1956 | 66397 | 89730 | 27.3 | Brian | |
5 | 3066884 Retest | 0.346 | 0.094 | 71457 | 94050 | 27.4 | Brian | |
6 | 3066884 Retest | 0.347 | 0.0946 | 69812 | 94500 | 29 | Brian | |
7 | 3066884 Retest | 0.347 | 0.0946 | 70066 | 94180 | 28.9 | Brian | |
8 | 3066884 Retest | 0.347 | 0.0946 | 71561 | 95060 | 28.7 | Brian |
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 5/19/2017 ✔