Summary for Test 2017-04-24-2-1
Test performed: ASTM F606-14Project Information
Project Identifiers | Project ID: 211223 DEA: 010B27U4 EFIS: 0115000111 |
---|---|
DIST-CO-RTE-PM | 01-DN-101-14.9/15.3 |
Award Date | 05/11/2016 |
Closeout Date | 11/27/2018 |
Work Description | CONSTRUCT RETAINING WALLS AND RECONSTRUCT ROADWAY |
Location Description | DEL NORTE COUNTY ABOUT 10 MILES NORTH OF KLAMATH FROM 2.2 MILES TO 2.6 MILES NORTH OF WILSON CREEK BRIDGE |
QA Service Level | 1 (Verified on 06/23/2016) |
Sample Information
Sample Taken Date | 04/24/2017 | Sample Unique Key | 2 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/11/2017 |
Sample type | Quality Assurance | A brief description of the sample | F1554 Grade 105 HDG Anchor Bolts |
The quantity of what the sample constitutes | 12 | From where was the sample collected | Job Site |
First name of sampler or witnessed by | C | Last name of sampler or witnessed by | Bapat |
Title of sampler | Structure Representative | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Gaffney Bolt Compant | Transportation Laboratory (TL) Number | C944451 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM3 - Fastener Assembly | Rocap Number(s) | |
---|---|---|---|
Heat Number(s) | 62140458-03 | Nut Mfg. Lot Number(s) | 308034A |
Washer Mfg. Lot Number(s) | 0812-881 | Bolt Specification | F1554-105 HDG |
Bolt Length(s) | 24" | Nut Specification | A563 |
Washer Specification | F436 | Finish | HDG |
Diameter/Size | 0.875 | Bolt Mfg. Lot Number | |
Rocap Test Requirement(s) | Lubricant Requirements(s) |
Test Details
DIME Sample ID: 2017-04-24-2
DIME Test ID: 2017-04-24-2-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM F606-14: Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets (Hex Cap Screws)
Test Release Date: 2017-05-22
Test Results
Number of Samples: 1
Input Type: Measured
Tester's full name: Arnold
Date of test: 05/01/2017
UTM: 400KIP
Temperature: 71
Num | Sample | Size | Area (in^2) | Peak Load (lbf) | Peak Load (kN) | Tensile Strength (psi) | Stress at Offset (psi) | Load at Offset (lbf) | Comments |
---|---|---|---|---|---|---|---|---|---|
1 | 1A | A449 7/8\" x 24\' Bolt 10 Deg Wedge | 0.462 | 58917 | 262 | 127526 | 117697 | 54376 | F1554 G105 |
General comments (publicly viewable) (Max 1000 characters): F1554 G105
Test Graph
Source: Partner Data Point FileTest was verified on 5/15/2017 ✔