Summary for Test 2017-03-06-10-1
Test performed: CONCLP 3-16Project Information
Project Identifiers | Project ID: 211736 DEA: 042A4904 EFIS: 0400000827 |
---|---|
DIST-CO-RTE-PM | 04-SF-280-R4.8/R6.2 |
Award Date | 12/09/2016 |
Closeout Date | 01/30/2018 |
Work Description | BRIDGE POLYESTER CONCRETE OVERLAY, DRAINAGE AND BARRIER RECONSTRUCTION |
Location Description | THE CITY AND COUNTY OF SAN FRANCISCO AT VARIOUS LOCATIONS FROM 0.5 MILE NORTH OF ROUTE 280/101 SEPARATION TO 0.2 MILE SOUTH OF 20TH STREET OVERCROSSING |
QA Service Level | 1 (Verified on 01/31/2017) |
Sample Information
Sample Taken Date | 03/06/2017 | Sample Unique Key | 10 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 03/08/2017 |
Sample type | Quality Control | A brief description of the sample | 1 gallon can |
The quantity of what the sample constitutes | 80 drums and 16 totes | From where was the sample collected | Source |
First name of sampler or witnessed by | Chris | Last name of sampler or witnessed by | Nunes |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | reichhold azusa | Transportation Laboratory (TL) Number | Unknown |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Polyester | Mfg. Lot Number(s) | 1035530 |
---|---|---|---|
Batch number | 1035530 | Mix number | 3228 |
Test Details
DIME Sample ID: 2017-03-06-10
DIME Test ID: 2017-03-06-10-1
Testing Lab: CT HQ - Sacramento Concrete Testing Laboratory
Test Method: CONCLP 3-16: Polyester Resin
Test Release Date: 2017-05-25
Test Results
Input Type: Measured
Tester's full name: Mike Mullins
Date of test: 03/21/2017
Viscosity ASTM D 2196, RVT, No. 1 spindle 75 to 200 cps @ 20 RPM, 77°F: 124 cps
Specific gravity ASTM D 1475 1.05 to 1.10 @ 77°F: 1.08
Conditioning (18/25/50 + 5/70) Elogation ASTM D 638, minimum 35%: 52.9 %
Tensile Strength ASTM D 638 Type 1 @ 0.45 in/min, minimum 2500 psi: 2855 psi
Styrene ASTM D 2369 40% to 50 %: 45.8 %
PCC - SSD bond strength CTM 551 500 psi minimun @ 24 hours: 485 psi
Static Volatile Emissions, SCAQMD 309-91, maximum loss 1.0 grams: 0.5 grams
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 5/25/2017 ✔