Summary for Test 2017-01-19-1-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 8196
DEA: 59912684
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work Description
Location Description
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date01/19/2017 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing01/23/2017
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes500ft From where was the sample collectedManufacturer
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberNA
Inspector Lot Number from the Transportation Laboratory (TL) FormNA Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0117110
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size2.75

Test Details

DIME Sample ID: 2017-01-19-1
DIME Test ID: 2017-01-19-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-02-13

Test Results


Input Type: Measured
Tester's full name: Brian
Date of test: 01/24/2017
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 52.7045 lbs
Width at 4 x Load at W1: 1.1953 in
Nominal Width: 2.75 in
Measured Maximum Uncompressed Width: 2.91 in
Measured Minimum Uncompressed Width: 2.8465 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 2.85 in
Height of Contact Face: 2.826 in
Length: no data
Spec Minimum Uncompressed Width: 2.8465 in
Area (5 Times of the Height of Contact Face): 14.13 sqin
Half of the Spec Minimum Uncompressed Width: 1.425 in
85 Percent of the Spec Minimum Uncompressed Width: 2.41952 in
3 Times of the Area: 42.39 sqin
4 Times of the Load at W1: 210.818 in
W1 (US Units): 2.42 in
W1 (Metric Units): 61.456 millimeters
W2 (US Units): 1.195 in
W2 (Metric Units): 30.361 millimeters
Satisfactory of MR of (US Units): 1.224 in
Satisfactory of MR of (Metric Units): 31.095 millimeters
Optional W1 Measurement 1: 2.4195 in
Optional W1 Measurement 2: 42.6726 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 2/6/2017