Summary for Test 2017-01-10-4-1
Test performed: CTM 673-July 2012Project Information
Project Identifiers | Project ID: 8196 DEA: 59912684 |
---|---|
DIST-CO-RTE-PM | 59--- |
Award Date | Not set |
Closeout Date | Not set |
Work Description | |
Location Description | |
QA Service Level | NOT VERIFIED |
Sample Information
Sample Taken Date | 01/10/2017 | Sample Unique Key | 4 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 01/11/2017 |
Sample type | Quality Assurance | A brief description of the sample | Joint Seal |
The quantity of what the sample constitutes | 500ft | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | David | Last name of sampler or witnessed by | Simon |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Watson Bowman | Transportation Laboratory (TL) Number | NA |
Inspector Lot Number from the Transportation Laboratory (TL) Form | NA | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | SMTL TM2 - Type B Elastomeric Joint Seal | Mfg. Lot Number(s) | 0116449 |
---|---|---|---|
Manufacturer(s) | Watson Bowman | Temperature | 72 |
Humidity | 50 | Comments | Unknown |
Joint Seal Size | 1.75" |
Test Details
DIME Sample ID: 2017-01-10-4
DIME Test ID: 2017-01-10-4-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2017-01-31
Test Results
Input Type: Measured
Tester's full name: Brian
Date of test: 01/13/2017
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 53.0167 lbs
Width at 4 x Load at W1: 0.877569 in
Nominal Width: 1.75 in
Measured Maximum Uncompressed Width: 1.949 in
Measured Minimum Uncompressed Width: 1.8945 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 1.85 in
Height of Contact Face: 1.9 in
Length: no data
Spec Minimum Uncompressed Width: 1.85 in
Area (5 Times of the Height of Contact Face): 9.5 sqin
Half of the Spec Minimum Uncompressed Width: 0.925 in
85 Percent of the Spec Minimum Uncompressed Width: 1.5725 in
3 Times of the Area: 28.5 sqin
4 Times of the Load at W1: 212.067 in
W1 (US Units): 1.573 in
W1 (Metric Units): 39.942 millimeters
W2 (US Units): 0.878 in
W2 (Metric Units): 22.29 millimeters
Satisfactory of MR of (US Units): 0.695 in
Satisfactory of MR of (Metric Units): 17.651 millimeters
Optional W1 Measurement 1: 1.6103 in
Optional W1 Measurement 2: 28.69 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Test was verified on 1/24/2017 ✔