Summary for Test 2016-06-30-12-2
Test performed: ASTM D412-06a-re13Project Information
| Project Identifiers | Project ID: 211155 DEA: 081F6304 EFIS: 0815000005 |
|---|---|
| DIST-CO-RTE-PM | 08-SBD-40-R105.8/149.9 |
| Award Date | 03/30/2016 |
| Closeout Date | 08/16/2023 |
| Work Description | REMOVE ASPHALT, PLACE CONCRETE OVERLAY AND REPLACE JOINT SEALS |
| Location Description | REMOVE ASPHALT, PLACE CONCRETE OVERLAY AND REPLACE JOINT SEALS |
| QA Service Level | 1 (Verified on 04/21/2016) |
Sample Information
| Sample Taken Date | 06/30/2016 | Sample Unique Key | 12 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 07/11/2016 |
| Sample type | Quality Assurance | A brief description of the sample | Bearing Pad |
| The quantity of what the sample constitutes | 49 | From where was the sample collected | Fabricator |
| First name of sampler or witnessed by | Corey | Last name of sampler or witnessed by | Nishioku |
| Title of sampler | Unknown | Telephone number of sampler | Unknown |
| Laboratory sample identification | Unknown | Linked DIME Sample ID | Unknown |
| The fabricator/manufacturer/facility name | Scougal Rubber | Transportation Laboratory (TL) Number | Unknown |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
| Structure name | Not set |
Material Information
| Material Type | SMTL TM1 - Elastomeric Bearing Pad | Mfg. Lot Number(s) | 14805-A,C,E,G |
|---|---|---|---|
| Material/Compound/Elastomer ID | NA | Samples Representing | 49 |
| Description (size) | 1in x 12in x 17in | Comments | Unknown |
| Description (Number of Shims) | 2 | Type of Bearing Pad | Steel |
| Description (Thickness of Shims) | 14 gage | Manufacturer(s) | Scougal Rubber |
| Batch Number | NA |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2016-06-30-12
DIME Test ID: 2016-06-30-12-2
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: ASTM D412-06a-re13: Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers-Tension
Test Release Date: 2016-07-21
Test Results
Number of specimens tested: 3
Unit of the Ultimate Tensile Values: lbf per sqr in
Input Type: Calculated
Tester's full name: Brian
Date of test: 07/20/2016
UTM: 2KIP
Humidity: 50 %
Temperature: 72 F
Sample 1 Median Thickness: 0.069 in
Sample 1 Thickness all Within 0.003 inch?: Yes
Sample 1 Ultimate Tensile: 2832.4 lbf/in^2
Sample 1 Elongation (350% Min): Pass
Sample 2 Median Thickness: 0.07 in
Sample 2 Thickness all Within 0.003 inch?: Yes
Sample 2 Ultimate Tensile: 3314.3 lbf/in^2
Sample 2 Elongation (350% Min): Pass
Sample 3 Median Thickness: 0.071 in
Sample 3 Thickness all Within 0.003 inch?: Yes
Sample 3 Ultimate Tensile: 3258.4 lbf/in^2
Sample 3 Elongation (350% Min): Pass
Median of the Ultimate Tensile Values: 3258.4 lbf/in^2
General comments (publicly viewable) (Max 1000 characters):
Test Graph
Source: Partner Data Point FileTest graph for Sample 1
Source: Partner Data Point File
Test graph for Sample 2
Source: Partner Data Point File
Test graph for Sample 3
Test was verified on 7/21/2016 ✔