Summary for Test 2016-07-11-4-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 8196
DEA: 59912684
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work Description
Location Description
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date07/11/2016 Sample Unique Key4
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/12/2016
Sample typeQuality Assurance A brief description of the sample5in Joint Seal
The quantity of what the sample constitutes600ft From where was the sample collectedManufacturer
First name of sampler or witnessed byDave Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameWatson Bowman Transportation Laboratory (TL) NumberNA
Inspector Lot Number from the Transportation Laboratory (TL) FormNA Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)1616280
Manufacturer(s)Watson Bowman Temperature72
Humidity50 CommentsUnknown
Joint Seal Size5.00

Test Details

DIME Sample ID: 2016-07-11-4
DIME Test ID: 2016-07-11-4-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2016-08-03

Test Results


Input Type: Measured
Tester's full name: Brian
Date of test: 07/15/2016
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 79.5887 lbs
Width at 4 x Load at W1: 2.03995 in
Nominal Width: 5 in
Measured Maximum Uncompressed Width: 5.127 in
Measured Minimum Uncompressed Width: 5.074 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 5.1 in
Height of Contact Face: 4.866 in
Length: no data
Spec Minimum Uncompressed Width: 5.074 in
Area (5 Times of the Height of Contact Face): 24.33 sqin
Half of the Spec Minimum Uncompressed Width: 2.55 in
85 Percent of the Spec Minimum Uncompressed Width: 4.3129 in
3 Times of the Area: 72.99 sqin
4 Times of the Load at W1: 318.355 in
W1 (US Units): 4.313 in
W1 (Metric Units): 109.548 millimeters
W2 (US Units): 2.04 in
W2 (Metric Units): 51.815 millimeters
Satisfactory of MR of (US Units): 2.273 in
Satisfactory of MR of (Metric Units): 57.733 millimeters
Optional W1 Measurement 1: 4.3129 in
Optional W1 Measurement 2: 73.4766 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 8/3/2016