Summary for Test 2021-10-13-57-1

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 214426
DEA: 030A5704
EFIS: 0300020593
DIST-CO-RTE-PM03-YUB-20-13.3/R18.2
Award Date01/02/2020
Closeout DateNot set
Work DescriptionBrowns Valley Rehab: CONSTRUCT BRIDGE, REALIGN CURVE, WIDEN SHOULDERS AND CULVERT WORK.
Location DescriptionYUBA COUNTY FROM MARYSVILLE ROAD TO THE YUBA RIVER BRIDGE
QA Service Level1 (Verified on 10/23/2019)

Sample Information

Sample Taken Date10/13/2021 Sample Unique Key57
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing11/16/2021
Sample typeAcceptance A brief description of the samplePG 64-16 Marathon
The quantity of what the sample constitutes1 Can, NO TEST 10/18, 10/19, 10/29, 10/30 From where was the sample collectedSource
First name of sampler or witnessed byTravis Last name of sampler or witnessed by-
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameTeichert - Hallwood Plant Transportation Laboratory (TL) Number707411
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-16
ModifiedNo Lot number8
Sublot number4 Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierMarathon Petroleum Co. LP - Elk Grove CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-10-13-57
DIME Test ID: 2021-10-13-57-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-12-03

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 11/28/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.159 kPa
Phase Angle (δ) (for the 10 cycles): 87.6 degree
Complex Modulus (G*) (for the 10 measurements): 1.326 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.33 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications ORIG

Test was verified on 12/3/2021