Summary for Test 2016-02-04-1-1

Test performed: CTM 673-July 2012

Project Information

Project IdentifiersProject ID: 8196
DEA: 59912684
DIST-CO-RTE-PM59---
Award DateNot set
Closeout DateNot set
Work Description
Location Description
QA Service LevelNOT VERIFIED

Sample Information

Sample Taken Date02/04/2016 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing02/11/2016
Sample typeQuality Assurance A brief description of the sampleJoint Seal
The quantity of what the sample constitutes550ft From where was the sample collectedSource
First name of sampler or witnessed byDavid Last name of sampler or witnessed bySimon
Title of samplerUnknown Telephone number of samplerUnknown
Laboratory sample identificationUnknown Linked DIME Sample IDUnknown
The fabricator/manufacturer/facility nameD S Brown Transportation Laboratory (TL) NumberUnknown
Inspector Lot Number from the Transportation Laboratory (TL) FormUnknown Structure unique identifierNot set
Structure nameNot set

Material Information

Material TypeSMTL TM2 - Type B Elastomeric Joint Seal Mfg. Lot Number(s)0116126
Manufacturer(s)D S Brown Temperature72
Humidity50 CommentsUnknown
Joint Seal Size3.50in

Test Details

DIME Sample ID: 2016-02-04-1
DIME Test ID: 2016-02-04-1-1
Testing Lab: CT HQ - Sacramento Structural Materials Testing Laboratory
Test Method: CTM 673-July 2012: Method of Determining Movement Rating of Type B1 and B2 Preformed Elastomeric Joint Seals
Test Release Date: 2016-02-25

Test Results


Input Type: Measured
Tester's full name: Brian
Date of test: 02/16/2016
UTM: 11KIP
Temperature: 72 ?F
Humidity: 50 %
Load at W1: 53.8866 lbs
Width at 4 x Load at W1: 1.49296 in
Nominal Width: 3.5 in
Measured Maximum Uncompressed Width: 3.8185 in
Measured Minimum Uncompressed Width: 3.7295 in
Minimum Uncompressed Width as Specified by the Manufacturer (MUWASBM): 3.75 in
Height of Contact Face: 3.531 in
Length: no data
Spec Minimum Uncompressed Width: 3.7295 in
Area (5 Times of the Height of Contact Face): 17.655 sqin
Half of the Spec Minimum Uncompressed Width: 1.875 in
85 Percent of the Spec Minimum Uncompressed Width: 3.17007 in
3 Times of the Area: 52.965 sqin
4 Times of the Load at W1: 215.546 in
W1 (US Units): 3.17 in
W1 (Metric Units): 80.52 millimeters
W2 (US Units): 1.493 in
W2 (Metric Units): 37.921 millimeters
Satisfactory of MR of (US Units): 1.677 in
Satisfactory of MR of (Metric Units): 42.599 millimeters
Optional W1 Measurement 1: 3.1701 in
Optional W1 Measurement 2: 53.3181 sqin
General comments (publicly viewable) (Max 1000 characters):
Test Graph

Test was verified on 2/25/2016