Summary for Test 2021-10-05-37-2

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 214321
DEA: 012982U4
EFIS: 0118000125
DIST-CO-RTE-PM01-LAK-29,175-28.5/31.6,8.2/8.5
Award Date11/07/2019
Closeout DateNot set
Work DescriptionCONSTRUCT 4 LANE EXPRESSWAY WITH EARTHWORK AND PAVING.
Location DescriptionLAKE COUNTY NEAR KELSEYVILLE ON ROUTE 29 FROM 0.6 MILE TO 3.7 MILES NORTH OF ROUTE 281 AND ON ROUTE 175 FROM SOUTH JUNCTION ROUTE 29 TO 0.3 MILE EAST OF SOUTH JUNCTION ROUTE 29
QA Service Level1 (Verified on 08/19/2019)

Sample Information

Sample Taken Date10/05/2021 Sample Unique Key37
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing10/18/2021
Sample typeAcceptance A brief description of the sampleTEST Asphalt Binder
The quantity of what the sample constitutes1 can From where was the sample collectedSource
First name of sampler or witnessed byThomas Last name of sampler or witnessed byLittle
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameValero Benicia Transportation Laboratory (TL) Number930510
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 58-34 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-10-05-37
DIME Test ID: 2021-10-05-37-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-10-22

Test Results


Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Erika Gonzalez
Date of test: 10/20/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.587 kPa
Phase Angle (δ) (for the 10 cycles): 58.9 degree
Complex Modulus (G*) (for the 10 measurements): 5.866 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 6.85 kPa
Stress Amplitude 2: 0.342 kPa
Phase Angle 2 (δ) (for the 10 cycles): 60.1 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 3.422 kPa
Test Temperature (Specimen 2): no data
Dynamic Shear 2, G*/sin(δ): 3.95 kPa
Delta at 2.2 kpa: 60.8 degree
General comments (publicly viewable) (Max 1000 characters): Per 2018 standard specifications RTFO

Test was verified on 10/22/2021