DIME - Test Summary

Summary for Test 2021-09-24-16-2

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 215697 DEA: 07318204 EFIS: 0715000286
DIST-CO-RTE-PM	07-LA-Route 1-4.0/4.2
Award Date	Not set
Closeout Date	Not set
Work Description	CM/GC Project - Work consists of constructing secant wall and slope restoration
Location Description	near Point Mugu State Park 0.4 mile South of Sycamore Canyon Road.
QA Service Level	1 (Verified on 08/26/2021)

Sample Taken Date	09/24/2021	Sample Unique Key	16
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	09/29/2021
Sample type	Verification	A brief description of the sample	JMF 1/2" HMA-A-SP R15 No LAS
The quantity of what the sample constitutes	6 Bags Aggregate, 2 Bags RAP	From where was the sample collected	Manufacturer
First name of sampler or witnessed by	Alex and Zaid	Last name of sampler or witnessed by	QC
Title of sampler		Telephone number of sampler
Laboratory sample identification	0561A-21	Linked DIME Sample ID
The fabricator/manufacturer/facility name	All American Asphalt-Irwindale	Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-33-0005
The fabricator's/manufacturer's product name for the sample	1/2 HMA-A-SP R15	The fabricator/manufacturer designation for the sample
The plant number	104775	A detailed description of where the material sample was collected	Belt Cut at All American Irwindale Plant
Where the material sample would have been placed if not sampled	Asphalt Paving	Primary Aggregate Nominal Size	1/2 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-09-24-16

DIME Test ID: 2021-09-24-16-2

Testing Lab: CT D08 - Fontana Southern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-10-12

Input Type: Measured

Tester's full name: Michael Magana

Date of test: 10/05/2021

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 970.6 grams

Mass of the pycnometer with water (B): 655.7 grams

Mass of the oven dried sample (before pycnometer) (A): 492.5 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 492.5 grams

Test Sample Preparation: 6% Moisture

Bulk specific gravity: 2.661

Bulk specific gravity (SSD Basis): 2.701

Apparent specific gravity: 2.773

Absorption: 1.5 %

General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/12/2021 ✔