Summary for Test 2021-09-16-31-2

Test performed: AASHTO T84-14

Project Information

Project IdentifiersProject ID: 215587
DEA: 081L6804
EFIS: 0820000138
DIST-CO-RTE-PM08-RIV-91,15-7.5/13.4,8.2/23.9
Award Date04/30/2021
Closeout Date08/16/2023
Work DescriptionSLAB REPLACEMENT, PLACE SLURRY SEAL AND REPLACE AC SURFACING.
Location DescriptionRIVERSIDE COUNTY IN AND NEAR CORONA AND MURRIETA ON ROUTE 91 FROM ROUTE 15/91 SEPARATION TO 0.4 MILE EAST OF TYLER STREET AND ON ROUTE 15 FROM 1.5 MILES NORTH OF WINCHESTER ROAD TO NICHOLS ROAD
QA Service Level1 (Verified on 06/23/2021)

Sample Information

Sample Taken Date09/16/2021 Sample Unique Key31
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing09/28/2021
Sample typeVerification A brief description of the sampleJMF 3/4" WMA-A-SP R15 0.4% EVO
The quantity of what the sample constitutes4 Bags Combined Agg., 2 Bags Rap From where was the sample collectedManufacturer
First name of sampler or witnessed byRMA Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0554A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameAll American Asphalt Corona Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-33-0005
The fabricator's/manufacturer's product name for the sample3/4 WMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number103793 A detailed description of where the material sample was collectedBelt Cut at All American Asphalt Corona Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2021-09-16-31
DIME Test ID: 2021-09-16-31-2
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-10-06

Test Results


Input Type: Measured
Tester's full name: Danilo Ferrer
Date of test: 10/01/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 971.2 grams
Mass of the pycnometer with water (B): 655.7 grams
Mass of the oven dried sample (before pycnometer) (A): 490.1 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 490.1 grams
Test Sample Preparation: 6% Moisture
Bulk specific gravity: 2.656
Bulk specific gravity (SSD Basis): 2.710
Apparent specific gravity: 2.807
Absorption: 2 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 10/6/2021