Test 2021-08-25-6-5 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 213469
DEA: 024C40V4
EFIS: 0218000125
DIST-CO-RTE-PM02-SHA-5-R3.8/R11.7
Work DescriptionWIDEN TO 6 LANES, BRIDGE REPLACEMENT AND WIDENING AND ROADWAY REHAB
Location DescriptionSHASTA COUNTY IN AND NEAR ANDERSON FROM ROUTE 5/273 SEPARATION TO 0.4 MILE SOUTH OF CHURN CREEK ROAD OVERCROSSING
Sample Information
Sample Taken Date8/25/2021 Sample Unique Key6
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing8/25/2021
Sample typeAcceptance A brief description of the sampleCombined Virgin Aggregate
The quantity of what the sample constitutes100k Ton Milestone From where was the sample collectedManufacturer
First name of sampler or witnessed byJD Last name of sampler or witnessed byAtkinson
Title of samplerMaterials Tester Laboratory sample identificationD78930
The fabricator/manufacturer/facility nameJ F Shea Construction Inc - Fawndale Rock and Asphalt - Redding CA Transportation Laboratory (TL) Number858989
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-45-0017
The fabricator's/manufacturer's product name for the sampleUnknown The fabricator/manufacturer designation for the sampleUnknown
The plant numberUnknown A detailed description of where the material sample was collectedLaboratory batched from untreated virgin sized aggregate stockpile
Where the material sample would have been placed if not sampled02 SHA 5 Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberNot Applicable Lot numberUnknown
Sublot numberUnknown HMA Design ID
Test Details
DIME Sample ID: 2021-08-25-6
DIME Test ID: 2021-08-25-6-5
Testing Lab: CT D02 - North Region Materials Lab
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-09-09
Test Results

Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 09/01/2021
Mass of saturated surface dry sample (before pycnometer) (S): 509.6 grams
Mass of the pycnometer with water and aggregate (C): 988.8 grams
Mass of the pycnometer with water (B): 662.9 grams
Mass of the oven dried sample (before pycnometer) (A): 500.1 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 509.6 grams
Mass of the oven dry aggregate (for absorption) (A): 500.1 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.722
Bulk specific gravity (SSD Basis):2.774
Apparent specific gravity:2.871
Absorption:1.9 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 09/09/2021