Test 2021-08-14-1-2 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 215109
DEA: 081C8504
EFIS: 0813000047
DIST-CO-RTE-PM08-RIV-74-0.0/5.8
Work DescriptionROADWAY EXCAVATION, HOT MIX ASPHALT, AND STRUCTURAL SHOTCRETE WALLS.
Location DescriptionRIVERSIDE COUNTY NEAR LAKE ELSINORE FROM ORANGE COUNTY LINE TO MONTE VISTA STREET
Sample Information
Sample Taken Date8/14/2021 Sample Unique Key1
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing8/17/2021
Sample typeVerification A brief description of the samplePSUE 3/4" HMA-A-SP R24
The quantity of what the sample constitutes6 Bags of Aggregate, 2 Bags of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byCalifornia Commercial Asphalt Lake Elsinore Last name of sampler or witnessed byQC
Title of sampler Laboratory sample identification0476A-21
The fabricator/manufacturer/facility nameCalifornia Commercial Asphalt - Lake Elsinore Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-33-0098, 91-33-0011
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R24 The fabricator/manufacturer designation for the sample
The plant number53417615 A detailed description of where the material sample was collectedBelt Cut at California Commercial Asphalt Lake Elsinore Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number1
Sublot number1 JMF Verification ID
Test Details
DIME Sample ID: 2021-08-14-1
DIME Test ID: 2021-08-14-1-2
Testing Lab: CT - Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-08-31
Test Results

Input Type: Measured
Tester's full name: Danilo Ferrer
Date of test: 08/19/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 963.4 grams
Mass of the pycnometer with water (B): 655.7 grams
Mass of the oven dried sample (before pycnometer) (A): 489.2 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 489.2 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.544
Bulk specific gravity (SSD Basis):2.600
Apparent specific gravity:2.695
Absorption:2.2 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 08/31/2021