Test 2021-08-03-13-2 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 215494
DEA: 081H4904
EFIS: 0817000059
DIST-CO-RTE-PM08-SBD-18-31.9/38.5
Work DescriptionCOLD PLANE AC PAVEMENT AND OVERLAY WITH HMA (TYPE A).
Location DescriptionSAN BERNARDINO COUNTY FROM 0.1 MILE EAST OF HILLTOP CONNECTOR TO 0.5 MILE EAST OF SIBERIA CREEK TRAIL
Sample Information
Sample Taken Date8/3/2021 Sample Unique Key13
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing8/5/2021
Sample typeVerification A brief description of the samplePSUE 3/4" HMA-A-SP R12, 0.75% LAS
The quantity of what the sample constitutes4 Bags of Combined Aggregate, 2 Bags of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byMatich Lytle Creek Last name of sampler or witnessed byQC
Title of sampler Laboratory sample identification0445A-21
The fabricator/manufacturer/facility nameMatich-Lytle Creek Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-36-0040
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R12 The fabricator/manufacturer designation for the sample
The plant numberLHP 62D A detailed description of where the material sample was collectedBelt Cut at Matich Lytle Creek Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID
Test Details
DIME Sample ID: 2021-08-03-13
DIME Test ID: 2021-08-03-13-2
Testing Lab: CT - Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-08-13
Test Results

Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 08/07/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 965.3 grams
Mass of the pycnometer with water (B): 653.3 grams
Mass of the oven dried sample (before pycnometer) (A): 494.3 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 494.3 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.629
Bulk specific gravity (SSD Basis):2.660
Apparent specific gravity:2.711
Absorption:1.2 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 08/13/2021