Test 2021-07-14-24-7 (AASHTO T315-20) Summary

Project Information
Project IdentifiersProject ID: 993160
DEA: 010J3204
EFIS: 0119000009
MINOR: 01A6022
Work DescriptionBoonville MS Overlay
Location DescriptionBoonville Maintenance Station
Sample Information
Sample Taken Date7/14/2021 Sample Unique Key24
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing7/28/2021
Sample typeAcceptance A brief description of the sampleTEST Asphalt Binder
The quantity of what the sample constitutes1 Can, #1 Test From where was the sample collectedSource
First name of sampler or witnessed byC Last name of sampler or witnessed byMalik
Title of samplerTET Laboratory sample identification
The fabricator/manufacturer/facility nameValero Transportation Laboratory (TL) Number637829
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAsphalt Binder Performance GradePG 76-22 M
ModifiedYes Lot number
Sublot number Tank number
Time of sample HMA Supplier
Asphalt Binder SupplierValero Marketing & Supply - Benicia CA MultigradeNo
Multigrade Type HMA Design ID
Test Details
DIME Sample ID: 2021-07-14-24
DIME Test ID: 2021-07-14-24-7
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-08-11
Test Results

Phase: RTFO residue two specimens
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 08/05/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.229 kPa
Phase Angle (δ) (for the 10 cycles): 67.7 degree
Complex Modulus (G*) (for the 10 measurements): 2.290 kPa
Dynamic Shear, G*/sin(δ): 2.48 kPa
Stress Amplitude 2: 0.131 kPa
Phase Angle 2 (δ) (for the 10 cycles): 69.7 degree
Complex Modulus 2 (G*) (for the 10 measurements) : 1.308 kPa
Test Temperature: 76.0 C
Dynamic Shear 2, G*/sin(δ): 1.39 kPa
Delta at 2.2 kpa: 68.2 degree
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications

Test was verified on 08/11/2021