Summary for Test 2021-05-24-53-5

Test performed: AASHTO T84-14

Project Information

Project IdentifiersProject ID: 215424
DEA: 024G4404
EFIS: 0214000013
DIST-CO-RTE-PM02-SIS-3-38.0/38.6
Award Date04/05/2021
Closeout Date08/14/2023
Work DescriptionBRIDGE REPLACEMENT
Location DescriptionSISKIYOU COUNTY ABOUT 6 MILES NORTH OF FORT JONES FROM 0.3 MILE SOUTH TO 0.3 MILE NORTH OF LOWER MOFFETT CREEK ROAD
QA Service Level1 (Verified on 01/19/2021)

Sample Information

Sample Taken Date05/24/2021 Sample Unique Key53
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing05/24/2021
Sample typeVerification A brief description of the sampleCombined Untreated 3/4-inch Type A Virgin Aggregate
The quantity of what the sample constitutesVerification of JMF 21-04-S01 From where was the sample collectedManufacturer
First name of sampler or witnessed byDevin Last name of sampler or witnessed byOwens
Title of sampler Telephone number of sampler
Laboratory sample identificationD78808F Linked DIME Sample ID
The fabricator/manufacturer/facility nameTullis - Nortstate Asphalt, Redding, CA Transportation Laboratory (TL) Number897297
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA, name of Pit or Job Site)91-45-0057
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedLaboratory Batched from Sized Untreated Virgin Stockpile Samples
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design numberJMF 21-04-S01 Lot number
Sublot number Aggregate Mix NumberNot set

Test Details

DIME Sample ID: 2021-05-24-53
DIME Test ID: 2021-05-24-53-5
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-08-03

Test Results


Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 06/02/2021
Mass of saturated surface dry sample (before pycnometer) (S): 501.9 grams
Mass of the pycnometer with water and aggregate (C): 977.7 grams
Mass of the pycnometer with water (B): 662.9 grams
Mass of the oven dried sample (before pycnometer) (A): 495.6 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 501.9 grams
Mass of the oven dry aggregate (for absorption) (A): 495.6 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.649
Bulk specific gravity (SSD Basis): 2.683
Apparent specific gravity: 2.741
Absorption: 1.3 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 8/3/2021