Summary for Test 2021-07-17-3-2

Test performed: AASHTO T84-14

Project Information

Project IdentifiersProject ID: 215494
DEA: 081H4904
EFIS: 0817000059
DIST-CO-RTE-PM08-SBD-18-31.9/38.5
Award Date04/05/2021
Closeout Date01/18/2022
Work DescriptionCOLD PLANE AC PAVEMENT AND OVERLAY WITH HMA (TYPE A).
Location DescriptionSAN BERNARDINO COUNTY FROM 0.1 MILE EAST OF HILLTOP CONNECTOR TO 0.5 MILE EAST OF SIBERIA CREEK TRAIL
QA Service Level1 (Verified on 07/06/2021)

Sample Information

Sample Taken Date07/17/2021 Sample Unique Key3
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/21/2021
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R12, 0.75%LAS
The quantity of what the sample constitutes5 Bags of Combined Aggregate, 3 Bags of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byMatich Lytle Creek Last name of sampler or witnessed byQC
Title of sampler Telephone number of sampler
Laboratory sample identification0419A-21 Linked DIME Sample ID
The fabricator/manufacturer/facility nameMatich Lytle Creek Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAggregate Source Identification (SMARA or name of Pit)91-36-0040::LYTLE CREEK
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R12 The fabricator/manufacturer designation for the sample
The plant numberLHP 62D A detailed description of where the material sample was collectedBelt Cut at Matich Lytle Creek Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID

Test Details

DIME Sample ID: 2021-07-17-3
DIME Test ID: 2021-07-17-3-2
Testing Lab: CT - Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-07-29

Test Results


Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 07/23/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 966.3 grams
Mass of the pycnometer with water (B): 655.7 grams
Mass of the oven dried sample (before pycnometer) (A): 491.9 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 491.9 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.597
Bulk specific gravity (SSD Basis):2.640
Apparent specific gravity:2.713
Absorption:1.6 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 7/29/2021