Summary for Test 2021-07-21-17-1

Test performed: AASHTO T315-20

Project Information

Project IdentifiersProject ID: 215630
DEA: 061A5304
EFIS: 0620000052
DIST-CO-RTE-PM06-FRE-198-26.3/26.8
Award Date05/12/2021
Closeout Date03/02/2022
Work DescriptionCOLD PLANE PAVEMENT, RESURFACE WITH HMA AND MODIFY SIGNAL.
Location DescriptionFRESNO COUNTY NEAR COALINGA FROM 0.5 MILE WEST OF ROUTE 5 TO ROUTE 198/5 SEPARATION
QA Service Level1 (Verified on 03/29/2021)

Sample Information

Sample Taken Date07/21/2021 Sample Unique Key17
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/23/2021
Sample typeAcceptance A brief description of the samplePG 70-10
The quantity of what the sample constitutes1 of 1 can From where was the sample collectedManufacturer
First name of sampler or witnessed byRick Last name of sampler or witnessed byGranite Tech
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite - Colinga Transportation Laboratory (TL) Numberc039907
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 70-10
ModifiedNo Lot number1
Sublot number4 Tank number
Time of sample HMA SupplierGranite - Coalinga
Certified Asphalt SupplierSan Joaquin Refinery - Bakersfield CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-07-21-17
DIME Test ID: 2021-07-21-17-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-20: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-07-28

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 07/27/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.147 kPa
Phase Angle (δ) (for the 10 cycles): 89.5 degree
Complex Modulus (G*) (for the 10 measurements): 1.226 kPa
Test Temperature (Specimen 1): 70.0 C
Dynamic Shear, G*/sin(δ): 1.23 kPa
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications Original DSR

Test was verified on 7/28/2021