Summary for Test 2021-05-24-40-1
Test performed: CTM 202-November 2011Project Information
| Project Identifiers | Project ID: 66666 DEA: APP EFIS: 0019000052 |
|---|---|
| DIST-CO-RTE-PM | 59--- |
| Award Date | Not set |
| Closeout Date | Not set |
| Work Description | Special project for submitting Sample information for Aggregate Pre-approval Program (APP). Object Code: 1025. J2 DEA: 912680. |
| Location Description | Not set |
| QA Service Level | NOT VERIFIED |
Sample Information
| Sample Taken Date | 05/24/2021 | Sample Unique Key | 40 |
|---|---|---|---|
| Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/21/2021 |
| Sample type | Aggregate Prequalification Program | A brief description of the sample | State Spec. Sand |
| The quantity of what the sample constitutes | production stockpile. | From where was the sample collected | Supplier |
| First name of sampler or witnessed by | Kevin | Last name of sampler or witnessed by | Owen |
| Title of sampler | Quality Control Supervisor | Telephone number of sampler | 209-481-2952 |
| Laboratory sample identification | 21-APPF-0124 | Linked DIME Sample ID | 2021-05-24-31 |
| The fabricator/manufacturer/facility name | Teichert Materials Vernalis | Transportation Laboratory (TL) Number | |
| Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
| Structure name |
Material Information
| Material Type | Aggregate | Source Identification (SMARA or name of Pit) | 91-39-0041::VERNALIS WEST & EAST PROPERTIES |
|---|---|---|---|
| The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
| The plant number | A detailed description of where the material sample was collected | Plant Stockpile | |
| Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | fine | |
| The concrete mix design number | Lot number | ||
| Sublot number | Aggregate Mix Number | Not set |
Test Details
Test Details QR Code
Scan this code to open this Test Details view on another device.
Sample Details QR Code
Scan this code to open this Sample Details view on another device.
DIME Sample ID: 2021-05-24-40
DIME Test ID: 2021-05-24-40-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2021-07-21
Test Results
What size aggregate is being tested?: Fine Aggregate
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Jay Horton
Date of test: 07/01/2021
Total mass of material in the sample: 509 grams
Individual mass retained on the 3/8 in. sieve: 0 grams
Individual mass retained on the #4 sieve: 0 grams
Individual mass retained on the #8 sieve: 57 grams
Individual mass retained on the #16 sieve: 147.9 grams
Individual mass retained on the #30 sieve: 115.8 grams
Individual mass retained on the #50 sieve: 108.4 grams
Individual mass retained on the #100 sieve: 55.4 grams
Individual mass retained on the #200 sieve: 12.2 grams
Individual mass retained on the pan: 12.2 grams
Cumulative percent passing the 3/8 in. sieve: 100 %
Cumulative percent passing the #4 sieve: 100 %
Cumulative percent passing the #8 sieve: 89 %
Cumulative percent passing the #16 sieve: 60 %
Cumulative percent passing the #30 sieve: 37 %
Cumulative percent passing the #50 sieve: 16 %
Cumulative percent passing the #100 sieve: 5 %
Cumulative percent passing the #200 sieve: 2 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/21/2021 ✔