Summary for Test 2015-07-28-11-1
Test performed: CTM 214-August 2010Project Information
Project Identifiers | Project ID: 209528 DEA: 023C0714 EFIS: 0212000037 |
---|---|
DIST-CO-RTE-PM | 02-LAS-395-61.5/R76.6 |
Award Date | 06/25/2014 |
Closeout Date | 12/20/2016 |
Work Description | PULVERIZE ROADBED , HMA, ROADWAY EXCAVATION |
Location Description | LASSEN COUNTY AT AND NEAR JOHNSTONVILLE AT VARIOUS LOCATIONS FROM 0.1 MILE NORTH OF BANGHAM LANE TO 0.3 MILE SOUTH OF WENDEL ROAD |
QA Service Level | 1 (Verified on 06/20/2014) |
Sample Information
Sample Taken Date | 07/28/2015 | Sample Unique Key | 11 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 08/07/2015 |
Sample type | Acceptance | A brief description of the sample | 3/8 |
The quantity of what the sample constitutes | 1 Bag | From where was the sample collected | Source |
First name of sampler or witnessed by | Jeff | Last name of sampler or witnessed by | Bline |
Title of sampler | Unknown | Telephone number of sampler | Unknown |
Laboratory sample identification | 15CPCC-0341 | Linked DIME Sample ID | Unknown |
The fabricator/manufacturer/facility name | Hat Creek Construction | Transportation Laboratory (TL) Number | C894838B |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Unknown | Structure unique identifier | Not set |
Structure name | Not set |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | NA |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | Unknown | The fabricator/manufacturer designation for the sample | Unknown |
The plant number | Unknown | A detailed description of where the material sample was collected | Stockpile |
Where the material sample would have been placed if not sampled | Unknown | Primary Aggregate Nominal Size | |
The concrete mix design number | Lot number | Not set | |
Sublot number | Not set | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2015-07-28-11
DIME Test ID: 2015-07-28-11-1
Testing Lab: CT HQ - Sacramento Aggregate Testing Laboratory
Test Method: CTM 214-August 2010: Method of Test for Soundness of Aggregates by Use of Sodium Sulfate
Test Release Date: 2015-08-21
Test Results
What size aggregate is being tested?: Coarse Aggregate
Input Type: Calculated
Tester's full name: Thomas Stinnett
Date of test: 08/07/2015
Percentage Loss of material retained on 2 x 1 ½ in. sieve: no data
Percentage Loss of material retained on 1 ½ x 1 in. sieve: no data
Percentage Loss of material retained on 1 x ¾ in. sieve: no data
Percentage Loss of material retained on ¾ x ½ in. sieve: no data
Percentage Loss of material retained on ½ x ⅜ in. sieve: no data
Percentage Loss of material retained on ⅜ in. x #4 sieve: no data
Percentage Loss of material retained on 2 in. through 1 1/2 in. sieve: no data
Percentage Loss of material retained on 1 in. through 3/4 in. sieve: no data
Percentage Loss of material retained on 3/4 in. through #4 sieve: no data
Weighted Average Percent Loss of Coarse Aggregate: 0.1 %
Batch Soundness Loss of Coarse Aggregate (2 1/2 in maximum): no data
Batch Soundness Loss of Coarse Aggregate (1 1/2 in maximum): no data
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 8/21/2015 ✔