Summary for Test 2021-06-28-28-6

Test performed: AASHTO T313-19

Project Information

Project IdentifiersProject ID: 215558
DEA: 101J1304
EFIS: 1018000136
DIST-CO-RTE-PM10-CAL,ALP-4,207-R58.0/R65.9,0.0/1.4
Award Date04/26/2021
Closeout Date12/07/2021
Work DescriptionCOLD PLANE EXISTING PAVEMENT AND RESURFACE WITH HMA.
Location DescriptionCALAVERAS AND ALPINE COUNTIES NEAR TAMARACK ON ROUTE 4 FROM 1.8 MILES WEST OF CABBAGE PATCH LOG ROAD TO ALPINE COUNTY LINE AND NEAR LAKE ALPINE ON ROUTE 207 FROM JUNCTION 4/207 TO END OF ROUTE (MT REBA RESORT)
QA Service Level1 (Verified on 03/26/2021)

Sample Information

Sample Taken Date06/28/2021 Sample Unique Key28
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing07/02/2021
Sample typeAcceptance A brief description of the samplePG64-28M
The quantity of what the sample constitutes1 can From where was the sample collectedManufacturer
First name of sampler or witnessed byJason Last name of sampler or witnessed byDehoff
Title of samplerInspector Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility namena Transportation Laboratory (TL) Numberc034927
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-28 M
ModifiedYes Lot number1
Sublot number1 Tank number
Time of sample HMA Supplier
Certified Asphalt SupplierMarathon Petroleum Co. LP - Elk Grove CA MultigradeNo
Multigrade Type Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-06-28-28
DIME Test ID: 2021-06-28-28-6
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T313-19: Standard Method of Test for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
Test Release Date: 2021-07-07

Test Results


Input Type: Measured
Tester's full name: Ruben Macias
Date of test: 07/07/2021
Minimum test bath temperature at 240 s: -18.0 C
Maximum test bath temperature at 240 s: -18.0 C
Time of test load application: no data
File name of test data: no data
Time beam in bath: no data
Time test started: no data
Flags issued by software during test: no data
Correlation coefficient (R²): 0
Regression coefficient a: no data
Regression coefficient b: no data
Regression coefficient c: no data
Load at time 0.0: 0.0 mN
Deflection at time 0.0 s: 0.000 µm
Load at time 0.5 s: 0.0 mN
Deflection at time 0.5 s: 0.000 µm
Load at 60.0 s: 978.0 mN
Beam deflection 60.0 s: 0.344 µm
Measured Stiffness Modulus 60.0 s: 236.000 mPa
Estimated Stiffness Modulus 60.0 s: 236.000 mPa
Difference between stiffness moduli 60.0 s: no data
Estimated m-value 60.0 s: 0.313
General comments (publicly viewable) (Max 1000 characters): Per 2018 Standard Specifications

Test was verified on 7/7/2021