DIME - Test Summary

Summary for Test 2021-04-28-28-8

Test performed: AASHTO T84-14

Project Identifiers	Project ID: 212914 DEA: 031E0604 EFIS: 0312000068
DIST-CO-RTE-PM	03-YUB-70-15.5/16.5
Award Date	07/31/2019
Closeout Date	08/30/2023
Work Description	SIMMERLY SLOUGH BRIDGE REPLACEMENT BR 16-0019 WITH BR 16-0055.
Location Description	NEAR MARYSVILLE, FROM 0.1 MILE NORTH OF BINNEY JUNCTION UNDERPASS TO 0.3 MILE NORTH OF LAURELLEN ROAD, AT SIMMERLY SLOUGH BRIDGE BR 16-0019.
QA Service Level	1 (Verified on 08/22/2019)

Sample Taken Date	04/28/2021	Sample Unique Key	28
Will the laboratory/organization for which you are a member perform testing on this material sample?	Yes	Date that the sample was received by the laboratory/organization performing the testing	04/28/2021
Sample type	Verification	A brief description of the sample	3/4" (Nominal size) Untreated Virgin Aggregate
The quantity of what the sample constitutes	3 Bags of Aggregate	From where was the sample collected	Source
First name of sampler or witnessed by	Teichert Personnel (SAMPLER)	Last name of sampler or witnessed by	Ken McHugh (WITNESS)
Title of sampler		Telephone number of sampler
Laboratory sample identification	JMF21-024	Linked DIME Sample ID
The fabricator/manufacturer/facility name	Teichert-Hallwood Plant	Transportation Laboratory (TL) Number	C741863
Inspector Lot Number from the Transportation Laboratory (TL) Form		Structure unique identifier
Structure name

Material Type	Aggregate	Source Identification (SMARA, name of Pit or Job Site)	91-58-0006::HALLWOOD PLANT
The fabricator's/manufacturer's product name for the sample		The fabricator/manufacturer designation for the sample
The plant number		A detailed description of where the material sample was collected	HMA Plant Cold Feed
Where the material sample would have been placed if not sampled		Primary Aggregate Nominal Size	3/4 inch
The concrete mix design number		Lot number
Sublot number		Aggregate Mix Number	Not set

DIME Sample ID: 2021-04-28-28

DIME Test ID: 2021-04-28-28-8

Testing Lab: CT D03 - Olivehurst Northern Regional Laboratory

Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)

Test Release Date: 2021-06-28

Input Type: Measured

Tester's full name: Julian Gonzales

Date of test: 06/08/2021

Mass of saturated surface dry sample (before pycnometer) (S): 500 grams

Mass of the pycnometer with water and aggregate (C): 960.6 grams

Mass of the pycnometer with water (B): 644.1 grams

Mass of the oven dried sample (before pycnometer) (A): 489.5 grams

Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams

Mass of the oven dry aggregate (for absorption) (A): 489.5 grams

Test Sample Preparation: Total Saturation

Bulk specific gravity: 2.668

Bulk specific gravity (SSD Basis): 2.725

Apparent specific gravity: 2.829

Absorption: 2.1 %

General comments (publicly viewable) (Max 1000 characters): JMF21-024.

Test was verified on 6/28/2021 ✔