Test 2021-04-28-28-5 (ASTM D4791-10) Summary

Project Information
Project IdentifiersProject ID: 212914
DEA: 031E0604
EFIS: 0312000068
DIST-CO-RTE-PM03-YUB-70-15.5/16.5
Work DescriptionSIMMERLY SLOUGH BRIDGE REPLACEMENT BR 16-0019 WITH BR 16-0055.
Location DescriptionNEAR MARYSVILLE, FROM 0.1 MILE NORTH OF BINNEY JUNCTION UNDERPASS TO 0.3 MILE NORTH OF LAURELLEN ROAD, AT SIMMERLY SLOUGH BRIDGE BR 16-0019.
Sample Information
Sample Taken Date4/28/2021 Sample Unique Key28
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing4/28/2021
Sample typeVerification A brief description of the sample3/4" (Nominal size) Untreated Virgin Aggregate
The quantity of what the sample constitutes3 Bags of Aggregate From where was the sample collectedSource
First name of sampler or witnessed byTeichert Personnel (SAMPLER) Last name of sampler or witnessed byKen McHugh (WITNESS)
Title of sampler Laboratory sample identificationJMF21-024
The fabricator/manufacturer/facility nameTeichert-Hallwood Plant Transportation Laboratory (TL) NumberC741863
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-58-0006
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedHMA Plant Cold Feed
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID
Test Details
DIME Sample ID: 2021-04-28-28
DIME Test ID: 2021-04-28-28-5
Testing Lab: CT D03 - North Region Materials Lab
Test Method: ASTM D4791-10: Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate (Withdrawn 2019) (Flat and Elongated Particles)
Test Release Date: 2021-06-28
Test Results

Method A - Percentage of Flat Particles, Elongated Particles, and Flat & Elongated Particles
Method B - Flat & Elongated Particles

Method: B
Determination: By Mass
Dimensional ratio used: 5:1
Input Type: Calculated
Tester's full name: Thomas Stinnett
Date of test: 06/09/2021
Weighted percentage of particles (by mass) that were flat and elongated:0 %
Weighted percentage of particles (by mass) that were not flat and elongated:100 %
General comments (publicly viewable) (Max 1000 characters): JMF21-024. Weighted percentage of particles (by mass) that were flat and elongated * reported by the D-3 Lab = 0.3%. The DIME software requires a positive integer. Consequently, the lab test results have been rounded up or down accordingly, then submitted into DIME.

Test was verified on 06/28/2021