Test 2021-04-23-23-5 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 215251
DEA: 021J4604
EFIS: 0220000081
DIST-CO-RTE-PM02-SIS-96-34.5/38.8,88.0/92.0
Work DescriptionHMA OVERLAY, REPLACE AC SURFACING, SHOULDER BACKING & TRAFFIC STRIPE.
Location DescriptionSISKIYOU COUNTY NEAR HAPPY CAMP FROM 0.1 MILE EAST OF OAK FLAT CREEK BRIDGE TO 0.1 MILE EAST OF BENJAMIN CREEK ROAD AND FROM 0.3 MILE WEST OF BEAVER CREEK BRIDGE TO 1.0 MILE WEST OF LUMGREY CREEK BRIDGE
Sample Information
Sample Taken Date4/23/2021 Sample Unique Key23
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing4/23/2021
Sample typeVerification A brief description of the sample1/2-inch Type A Untreated Virgin Aggregate
The quantity of what the sample constitutesJMF Verification From where was the sample collectedSource
First name of sampler or witnessed byDevin Last name of sampler or witnessed byOwens
Title of samplerPEI Laboratory sample identificationD78785F
The fabricator/manufacturer/facility nameShasta Ranch Aggregates - Anderson, CA Transportation Laboratory (TL) Number897292
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-45-0057
The fabricator's/manufacturer's product name for the sample The fabricator/manufacturer designation for the sample
The plant number A detailed description of where the material sample was collectedLaboratory Batched
Where the material sample would have been placed if not sampled Primary Aggregate Nominal Size1/2 inch
The concrete mix design numberJMF 21-05-S01 Lot number
Sublot number JMF Verification ID JMF3513-2021-61
Test Details
DIME Sample ID: 2021-04-23-23
DIME Test ID: 2021-04-23-23-5
Testing Lab: CT D02 - North Region Materials Lab
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-06-28
Test Results

Input Type: Measured
Tester's full name: Dennis Hickey
Date of test: 06/28/2021
Mass of saturated surface dry sample (before pycnometer) (S): 493.1 grams
Mass of the pycnometer with water and aggregate (C): 971.8 grams
Mass of the pycnometer with water (B): 662.9 grams
Mass of the oven dried sample (before pycnometer) (A): 485.7 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 493.1 grams
Mass of the oven dry aggregate (for absorption) (A): 485.7 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.637
Bulk specific gravity (SSD Basis):2.677
Apparent specific gravity:2.747
Absorption:1.5 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 06/28/2021