Summary for Test 2021-06-14-34-2
Test performed: AASHTO T84-14Project Information
Project Identifiers | Project ID: 215468 DEA: 120S4404 EFIS: 1220000069 |
---|---|
DIST-CO-RTE-PM | 12-ORA-142-3.1/6.4 |
Award Date | 03/16/2021 |
Closeout Date | 09/09/2021 |
Work Description | COLD PLANE AC PVMT AND PLACE RHMA. |
Location Description | ORANGE COUNTY IN BREA FROM 0.5 MILE EAST OF BREA HILLS AVENUE TO SAN BERNARDINO COUNTY LINE |
QA Service Level | 1 (Verified on 02/22/2021) |
Sample Information
Sample Taken Date | 06/14/2021 | Sample Unique Key | 34 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 06/22/2021 |
Sample type | Verification | A brief description of the sample | PSUE 1/2" RHMA-G-WMA 0.6% Evotherm |
The quantity of what the sample constitutes | 3 Bags Of Combined Aggregate | From where was the sample collected | Manufacturer |
First name of sampler or witnessed by | Blue Diamond Materials Irwindale | Last name of sampler or witnessed by | QC |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | 0379G-21 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Blue Diamond Material-Irwindale | Transportation Laboratory (TL) Number | |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | 91-19-0052 |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | 1/2 RWMA-G-SP | The fabricator/manufacturer designation for the sample | |
The plant number | 300191 WMA | A detailed description of where the material sample was collected | Belt Cut at Blue Diamond Irwindale Plant |
Where the material sample would have been placed if not sampled | Asphalt Paving | Primary Aggregate Nominal Size | 1/2 inch |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-06-14-34
DIME Test ID: 2021-06-14-34-2
Testing Lab: CT D08 - Fontana Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-07-06
Test Results
Input Type: Measured
Tester's full name: Friday Ofoegbu
Date of test: 06/24/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 966.6 grams
Mass of the pycnometer with water (B): 655.7 grams
Mass of the oven dried sample (before pycnometer) (A): 493.4 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 493.4 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity: 2.609
Bulk specific gravity (SSD Basis): 2.644
Apparent specific gravity: 2.704
Absorption: 1.3 %
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/6/2021 ✔