Test 2021-05-12-44-3 (AASHTO T84-14) Summary

Project Information
Project IdentifiersProject ID: 215534
DEA: 081K8404
DIST-CO-RTE-PM08-SBD-247-39.0/42.0&46.0/70.0
Work DescriptionRUBBERIZED HMA AND HIGH DENSITY POLYURETHANE MATERIAL INJECTION.
Location DescriptionSAN BERNARDINO COUNTY AT LUCERNE VALLEY FROM 0.5 MILE SOUTH OF CAMP ROCK ROAD TO 0.1 MILE SOUTH OF MIDWAY AVENUE AND FROM 1.1 MILES SOUTH OF HOLMES ROAD TO 1.2 MILES NORTH OF STODDARD VALLEY ROAD
Sample Information
Sample Taken Date5/12/2021 Sample Unique Key44
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing5/24/2021
Sample typeVerification A brief description of the sampleJMF 3/4" HMA-A-SP R15 0.75%LAS
The quantity of what the sample constitutes12 Bags of Aggregate, 2 Bags of RAP From where was the sample collectedManufacturer
First name of sampler or witnessed byVulcan Oro Grande Last name of sampler or witnessed byQC
Title of sampler Laboratory sample identification0300A-21
The fabricator/manufacturer/facility nameVulcan-Oro Grande Transportation Laboratory (TL) Number
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAggregate Source Identification (SMARA or name of Pit)91-36-0022/91-36-0046/91-36-00137
The fabricator's/manufacturer's product name for the sample3/4 HMA-A-SP R15 The fabricator/manufacturer designation for the sample
The plant number220991 ORO MPC A detailed description of where the material sample was collectedBelt Cut at Vulcan Oro Grande Plant
Where the material sample would have been placed if not sampledAsphalt Paving Primary Aggregate Nominal Size3/4 inch
The concrete mix design number Lot number
Sublot number JMF Verification ID
Test Details
DIME Sample ID: 2021-05-12-44
DIME Test ID: 2021-05-12-44-3
Testing Lab: CT - Southern Regional Laboratory
Test Method: AASHTO T84-14: Standard Method of Test for Specific Gravity and Absorption of Fine Aggregate (Fine Specific Gravity)
Test Release Date: 2021-06-09
Test Results

Input Type: Measured
Tester's full name: Danilo Ferrer
Date of test: 06/03/2021
Mass of saturated surface dry sample (before pycnometer) (S): 500 grams
Mass of the pycnometer with water and aggregate (C): 964.3 grams
Mass of the pycnometer with water (B): 653.2 grams
Mass of the oven dried sample (before pycnometer) (A): 492.3 grams
Mass of the saturated surface dry aggregate (for absorption) (S): 500 grams
Mass of the oven dry aggregate (for absorption) (A): 492.3 grams
Test Sample Preparation: Total Saturation
Bulk specific gravity:2.606
Bulk specific gravity (SSD Basis):2.647
Apparent specific gravity:2.717
Absorption:1.6 %
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 06/09/2021