Test 2021-05-06-17-5 (AASHTO T315-16) Summary

Project Information
Project IdentifiersProject ID: 214874
DEA: 022H0504
EFIS: 0216000093
DIST-CO-RTE-PM02-TRI-36-R34.8/R35.4
Work DescriptionREALIGN ROADWAY, DRAINAGE, GUARDRAIL, AND EROSION CONTROL.
Location DescriptionTRINITY COUNTY ABOUT 15 MILES WEST OF PLATINA FROM 3.6 MILES TO 2.9 MILES WEST OF HAYFORK CREEK BRIDGE.
Sample Information
Sample Taken Date5/6/2021 Sample Unique Key17
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing5/20/2021
Sample typeAcceptance A brief description of the samplePG64-28M
The quantity of what the sample constitutes1 of 1 can From where was the sample collectedManufacturer
First name of sampler or witnessed byno TL101 tag Last name of sampler or witnessed byno TL 101 tag
Title of sampler Laboratory sample identification
The fabricator/manufacturer/facility nameKnife River - Orland Transportation Laboratory (TL) Numberc768290 marked on can
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeAsphalt Binder Performance GradePG 64-28 M
ModifiedYes Lot number1
Sublot number1 Tank number
Time of sample HMA SupplierKnife River - Orland
Asphalt Binder SupplierMarathon Petroleum Co. LP - Elk Grove CA MultigradeNo
Multigrade TypeNot set HMA Design ID
Test Details
DIME Sample ID: 2021-05-06-17
DIME Test ID: 2021-05-06-17-5
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-05-28
Test Results

Phase: RTFO residue
Input Type: Measured
Tester's full name: HT
Date of test: 05/25/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 10.00 %
Stress Amplitude: 0.202 kPa
Phase Angle (δ) (for the 10 cycles): 69.3 degree
Complex Modulus (G*) (for the 10 measurements): 2.020 kPa
Test Temperature: 710.0 C
Dynamic Shear, G*/sin(δ): 2.16 kPa
General comments (publicly viewable) (Max 1000 characters): RTFO - 2nd for Delta Calculation

Test was verified on 05/28/2021