Summary for Test 2021-05-18-18-1
Test performed: AASHTO T59-16Project Information
Project Identifiers | Project ID: 215322 DEA: 061B0004 EFIS: 0620000147 |
---|---|
DIST-CO-RTE-PM | 06-KER-33,119-34.2/40.0,R10.0/18.1 |
Award Date | 12/30/2020 |
Closeout Date | 11/23/2021 |
Work Description | COLD PLANE AND REPLACE WITH HMA AND RESURFACE WITH CHIP SEAL. |
Location Description | KERN COUNTY AT MCKITTRICK ON ROUTE 33 FROM 0.1 MILE SOUTH OF G STREET TO 1.1 MILES SOUTH OF LOKERN ROAD AND ABOUT 9 MILES EAST OF TAFT ON ROUTE 119 FROM 0.1 MILE WEST OF ELK HILLS ROAD TO 0.1 MILE WEST OF JUNCTION ROUTE 43 |
QA Service Level | 1 (Verified on 11/30/2020) |
Sample Information
Sample Taken Date | 05/18/2021 | Sample Unique Key | 18 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/21/2021 |
Sample type | Acceptance | A brief description of the sample | PMCRS-2h Emulsion |
The quantity of what the sample constitutes | 1 of 1 jug | From where was the sample collected | Job Site |
First name of sampler or witnessed by | NOT | Last name of sampler or witnessed by | PROVIDED |
Title of sampler | CT | Telephone number of sampler | |
Laboratory sample identification | Linked DIME Sample ID | ||
The fabricator/manufacturer/facility name | Talley Oil - Taft | Transportation Laboratory (TL) Number | c771004 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Asphaltic Emulsion | Emulsion Grade | PMCRS-2h |
---|---|---|---|
Lot Number | Not set | Sub Lot | Not set |
Test Details
DIME Sample ID: 2021-05-18-18
DIME Test ID: 2021-05-18-18-1
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T59-16: Standard Method of Test for Emulsified Asphalts (Emulsified Asphalt Residue Evap. (Sec. 7))
Test Release Date: 2021-05-24
Test Results
How many beakers will be used to conduct the test?: 4
Input Type: Measured
Tester's full name: Minoo Ahmadi
Date of test: 05/24/2021
Beaker 1 Mass of beaker, rod, screen (if used), and residue: 449.6 g
Beaker 1 Tare mass of the beaker, rod, and screen (if used): 417.3 g
Beaker 2 Mass of beaker, rod, screen (if used), and residue: 449.2 g
Beaker 2 Tare mass of the beaker, rod, and screen (if used): 416.8 g
Beaker 3 Mass of beaker, rod, screen (if used), and residue: 452.1 g
Beaker 3 Tare mass of the beaker, rod, and screen (if used): 419.8 g
Beaker 4 Mass of beaker, rod, screen (if used), and residue: 451.4 g
Beaker 4 Tare mass of the beaker, rod, and screen (if used): 419.0 g
Beaker 1 Residue: 64.6 %
Beaker 2 Residue: 64.8 %
Beaker 3 Residue: 64.6 %
Beaker 4 Residue: 64.8 %
Percentage of residue: 65.0 %
General comments (publicly viewable) (Max 1000 characters): 2018 Per Spec.
Test was verified on 5/24/2021 ✔