Summary for Test 2021-05-04-21-2
Test performed: CTM 202-November 2011Project Information
Project Identifiers | Project ID: 212496 DEA: 024E4504 EFIS: 0200020286 |
---|---|
DIST-CO-RTE-PM | 02-LAS,MOD-139,299-VAR |
Award Date | 07/28/2020 |
Closeout Date | 08/14/2023 |
Work Description | PLACE HMA, REPLACE DRAINAGE, CULVERT, ELECTRICAL AND LIGHTING SYSTEMS. |
Location Description | LASSEN AND MODOC COUNTIES ON ROUTE 139 AT 0.1 MILE NORTH OF LASSEN COUNTY LINE AND ON ROUTE 299 AT VARIOUS LOCATONS FROM 0.4 MILE WEST OF BOYD HILL LOOKOUT ROAD TO 0.6 MILE EAST OF COUNTY ROAD 87 |
QA Service Level | 1 (Verified on 06/06/2017) |
Sample Information
Sample Taken Date | 05/04/2021 | Sample Unique Key | 21 |
---|---|---|---|
Will the laboratory/organization for which you are a member perform testing on this material sample? | Yes | Date that the sample was received by the laboratory/organization performing the testing | 05/05/2021 |
Sample type | Acceptance | A brief description of the sample | 3/4" Class II AB |
The quantity of what the sample constitutes | Unknown | From where was the sample collected | Job Site |
First name of sampler or witnessed by | E. | Last name of sampler or witnessed by | Chavez |
Title of sampler | Telephone number of sampler | ||
Laboratory sample identification | D78790 | Linked DIME Sample ID | |
The fabricator/manufacturer/facility name | Hat Creek Construction | Transportation Laboratory (TL) Number | 765844 |
Inspector Lot Number from the Transportation Laboratory (TL) Form | Structure unique identifier | ||
Structure name |
Material Information
Material Type | Aggregate | Source Identification (SMARA, name of Pit or Job Site) | Hat Creek Lookout, CA |
---|---|---|---|
The fabricator's/manufacturer's product name for the sample | The fabricator/manufacturer designation for the sample | ||
The plant number | A detailed description of where the material sample was collected | 02-LAS,MOD-139,299 VAR, EB A Line Route 299 at STA 1365 plus 50 | |
Where the material sample would have been placed if not sampled | Primary Aggregate Nominal Size | 3/4 inch | |
The concrete mix design number | Lot number | ||
Sublot number | Aggregate Mix Number | Not set |
Test Details
DIME Sample ID: 2021-05-04-21
DIME Test ID: 2021-05-04-21-2
Testing Lab: CT D02 - Redding Northern Regional Laboratory
Test Method: CTM 202-November 2011: Method of Test for Sieve Analysis of Fine and Coarse Aggregates
Test Release Date: 2021-07-02
Test Results
What size aggregate is being tested?: Combined Gradation
Individual or cumulative mass retained on each sieve?: Individual Mass Retained
For Combined Gradation only, has the fine aggregate sample been reduced?: No
For Combined Gradation only, use #40 Sieve?: No
Input Type: Measured
Tester's full name: Terry McCormick
Date of test: 05/06/2021
Individual Mass Retained | Cumulative Percent Passing | |||||
---|---|---|---|---|---|---|
grams | ||||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
0 grams | 100 % | |||||
284 grams | 96 % | |||||
1358 grams | 75.8 % | |||||
820 grams | 64 % | |||||
1603 grams | 40 % | |||||
159.1 grams | 27 % | |||||
94.1 grams | 19 % | |||||
56.3 grams | 14 % | |||||
33.6 grams | 11 % | |||||
23.7 grams | 9 % | |||||
18.7 grams | 7.7 % | |||||
92.6 grams |
General comments (publicly viewable) (Max 1000 characters):
Test was verified on 7/2/2021 ✔