Summary for Test 2021-04-23-9-2

Test performed: AASHTO T315-16

Project Information

Project IdentifiersProject ID: 215163
DEA: 060X3904
EFIS: 0618000061
DIST-CO-RTE-PM06-KIN-43-0.0/3.2
Award Date11/17/2020
Closeout Date03/02/2022
Work DescriptionCOLD PLANE PAVEMENT, PLACE HMA, RHMA AND TRAFFIC STRIPING.
Location DescriptionKINGS COUNTY IN AND NEAR CORCORAN FROM TULARE COUNTY LINE TO 0.1 MILE NORTH OF SANTA FE AVENUE
QA Service Level1 (Verified on 09/14/2020)

Sample Information

Sample Taken Date04/23/2021 Sample Unique Key9
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing04/28/2021
Sample typeAcceptance A brief description of the samplePG64-16
The quantity of what the sample constitutes1 of 1 can From where was the sample collectedManufacturer
First name of sampler or witnessed byGranite Last name of sampler or witnessed byTech
Title of sampler Telephone number of sampler
Laboratory sample identification Linked DIME Sample ID
The fabricator/manufacturer/facility nameGranite Coalinga Transportation Laboratory (TL) Numberc040169
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name

Material Information

Material TypeAsphalt Binder Performance GradePG 64-16
ModifiedNo Lot number
Sublot number Tank number
Time of sample HMA SupplierGranite Coalinga
Certified Asphalt SupplierSan Joaquin Refinery - Bakersfield CA MultigradeNo
Multigrade TypeNot set Asphalt Binder Mix NumberNot set

Test Details

DIME Sample ID: 2021-04-23-9
DIME Test ID: 2021-04-23-9-2
Testing Lab: CT HQ - Sacramento Asphalt Binder Laboratory
Test Method: AASHTO T315-16: Standard Method of Test for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) (Dynamic Shear)
Test Release Date: 2021-05-05

Test Results


Phase: Original binder
Input Type: Measured
Tester's full name: Eva Torres
Date of test: 05/03/2021
Test Plate Diameter: 25 mm
Test Gap: 1 mm
Test Frequency: 10.0 rad/s
Strain Amplitude: 12.00 %
Stress Amplitude: 0.138 kPa
Phase Angle (δ) (for the 10 cycles): 89.3 degree
Complex Modulus (G*) (for the 10 measurements): 1.151 kPa
Test Temperature (Specimen 1): 64.0 C
Dynamic Shear, G*/sin(δ): 1.15 kPa
General comments (publicly viewable) (Max 1000 characters): Original

Test was verified on 5/5/2021