Test 2021-03-30-11-1 (ASTM C39-17a) Summary

Project Information
Project IdentifiersProject ID: 213707
DEA: 081C38U4
EFIS: 0817000196
DIST-CO-RTE-PM08-RIV-10-6.7/R25.1
Work DescriptionRemove concrete pavement and base, and place HMA and JPCP
Location DescriptionROUTE 10/60 SEPARATION IN BEAUMONT TO ROUTE 10/111 SEPARATION NEAR CABAZON.
Sample Information
Sample Taken Date3/30/2021 Sample Unique Key11
Will the laboratory/organization for which you are a member perform testing on this material sample?Yes Date that the sample was received by the laboratory/organization performing the testing3/31/2021
Sample typeQuality Control A brief description of the sample6x12
The quantity of what the sample constitutes6 From where was the sample collectedJob Site
First name of sampler or witnessed byKevin Last name of sampler or witnessed byO
Title of sampler Laboratory sample identification1012-18
The fabricator/manufacturer/facility nameCOFFMAN Transportation Laboratory (TL) NumberSET 18
Inspector Lot Number from the Transportation Laboratory (TL) Form Structure unique identifier
Structure name
Material Information
Material TypeConcrete The concrete mix design number1906-23
The truck number from where the sample was collectedna The batch plant ticket number from where the sample was collected18
Concrete batch plant The fabricator/manufacturer designation for the sample
A detailed description of where the material sample was collectedJOB Where the material sample would have been placed if not sampledI10 WB LINE H LANE 4 AND SHOULDER STA 55780
From Lot No. Bag Lot No.
Test Details
DIME Sample ID: 2021-03-30-11
DIME Test ID: 2021-03-30-11-1
Testing Lab: CT - Southern Regional Laboratory
Test Method: ASTM C39-17a: Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
Test Release Date: 2021-04-06
Test Results

Unit system used?: US Units
Number of specimens: 6
Test performed: With no density determined
Input Type: Measured
Tester's full name: Jose Guzman
Date of test: 04/06/2021
Capped in accordance with?: ASTM C617/CTM521
Average diameter of cylinder 1: 5.97 in
Average diameter of cylinder 2: 5.97 in
Average diameter of cylinder 3: 5.97 in
Average diameter of cylinder 4: 5.97 in
Average diameter of cylinder 5: 5.98 in
Average diameter of cylinder 6: 5.97 in
Maximum load on cylinder 1: 21425 lb
Maximum load on cylinder 2: 21880 lb
Maximum load on cylinder 3: 21945 lb
Maximum load on cylinder 4: 21820 lb
Maximum load on cylinder 5: 21995 lb
Maximum load on cylinder 6: 21190 lb
Type of fracture pattern of cylinder 1: 2
Type of fracture pattern of cylinder 2: 2
Type of fracture pattern of cylinder 3: 2
Type of fracture pattern of cylinder 4: 2
Type of fracture pattern of cylinder 5: 2
Type of fracture pattern of cylinder 6: 2
Comment on any defect in either specimen or caps (Max 250 Characters): no data
Correction factor for cylinder 1: 1
Correction factor for cylinder 2: 1
Correction factor for cylinder 3: 1
Correction factor for cylinder 4: 1
Correction factor for cylinder 5: 1
Correction factor for cylinder 6: 1
Age of specimen: 7 days
Age of specimen in hours: no data
Cross sectional area of cylinder 1: 27.99 in^2
Cross sectional area of cylinder 2: 27.99 in^2
Cross sectional area of cylinder 3: 27.99 in^2
Cross sectional area of cylinder 4: 27.99 in^2
Cross sectional area of cylinder 5: 28.09 in^2
Cross sectional area of cylinder 6: 27.99 in^2
Compressive strength of cylinder 1: 765.5 psi
Compressive strength of cylinder 2: 781.7 psi
Compressive strength of cylinder 3: 784 psi
Compressive strength of cylinder 4: 779.6 psi
Compressive strength of cylinder 5: 783 psi
Compressive strength of cylinder 6: 757.1 psi
Compressive strength (to nearest 10 psi):780 psi
General comments (publicly viewable) (Max 1000 characters):

Test was verified on 04/06/2021